Search results for query: *

I attempted to locate the Mopar 5 blade fan for you at Summit since it appears it is no longer available at Mancini Racing. I found the Dorman product when searching 5 blade mechanical fans. Go to Dorman.com and reference the product number: Dorman Products - 620-054. As mentioned the fan moves...

I am using the Jag clutch with the Mopar Performance 5 blade fan. I have used this set up with zero problems over 4 seasons. The 5 blade fan moves air and is a bit lighter than the standard Mopar 7 blade clutch fan. I purchased the Mopar 5 blade fan from Mancini Racing. I will switch to the new...

I am using the Hayden clutch with a 5-blade Mopar fan on my 416. I am using a Wizard Cooling 22 in radiator and shroud. The radiator is a 22 in unit (two row, 1.25). I am also using stock crank and water pump pulleys. I have never had a problem with over heating. Water temperatures range from...

I have a stock dual groove pulley. If you want to use it to evaluate clearance with your setup, let me know.

Mancini has the water pump pulley on their web site for $75.

Mancini sells the stock pulley in black or chrome. They are thin at the base. You will pick up a 1/4 inch in clearance. I have the jag clutch with stock pulley on my setup. I have 1 inch clearance. I use a custom shroud and the fan is half in and half out. Perfect setup. I run 180 degree temps...

Is that a Mach water pump pulley? If it is a Mach pulley, it is thicker at the mounting base. Try using a stock pulley. The stock pulley is much thinner at the mounting base. You will gain some clearance.

I have used Wizard Cooling. Good people to work with. I have a Wizard Cooling radiator and shroud in my 68 Barracuda. The setup is great.

Great radiator. I purchased a Wizzard Cooling radiator for my 68 Barracuda last summer. The radiator I purchased was the two row with 1.25 in tubes and the shroud. The shroud is nothing less than a work of art. The system keeps my 416 stroker cool in 90 heat. The radiator and shroud were not...