Search results for query: *

Yes I did go with the Stewart stat.

Thanks for the feedback everyone. Just ordered a Flowcooler pump and high flow stat. Curious how well it works.

I was looking at the Milodon or Flowkooler pump too. I agree on the other details you guys provided

Good evening all. I'm replacing my water pump as my previous failed and started leaking. I know there are "performance" pumps out there to help flow at idle and prevent cavitation at high rpm for $100+. At rockauto I found the following two pumps that have the same improved impeller but for half...

Where did you find the fan shroud for this?

My Taurus fan is steady @ 18-20 amps while running. I also have the electric fuel pump, stereo etc but i did upgrade the wiring to the ammeter and also have the same guage wire going directly from the alt. to the starter relay with a fusable link. still shows a reading one the ammeter but isnt...

Correct. The shroud perimeter is very close to 22" x 17".

It should work nice... not bad for a $15 pickup from the local junk yard.

I installed the fan and shroud yesterday and took it out for a drive (wires are now hidden and cleaned up unlike the picture). Just like before while moving the car stays right at 180 so nothing changed there. now when the car was running in the driveway i let it creep up to 205ish and then...

A few more pics of the fan shroud install. I ended up just removing the radiator to flush it and will be easier to install the mounting brackets. should have those on tonight... The spacing from the water pump pulley is about 5/8" to the side of the electric motor but it gets close to the...

Good morning everyone, A few years back i installed a 3-core champion radiator for my 340. Since the old design did not allow use of the original fan shrough and fan i installed a generic 16" electric fan with no shroud. Overall that worked fine and would run at just over 190 when it was in...