Search results for query: *

ya, the jumper wire is an easy test. Trailbeast is correct, if there is any voltage fluctuation in that blue regulator wire the regulator freaks out and bounces trying to control the voltage. i fought the same problem with mine and sure enough i tried the jumper and wow, no more jumping! Then i...

Just take a jumper wire and connect one end to the positive battery terminal, start the car and then take the other end of the jumper wire and connect it to the blue wire on the regulator (leave the blue connected to the reg as it would normally be), now check the amp meter and see if it...

this is the fix i used to stop mine from jumping all over the place. works perfectly after making this mod.

Well I`ll be damned! Your fix works! I didnt wire in the relay yet but i did try a jumper from the blue ign feed at the regulator to battery positive and the damn voltage stabilized! I`m still not sure why this works as the voltage reading on the blue ign is only 1/2 a volt lower than battery...

To much going on with Christmas to get to it yet but I did take it out for a ride yesterday!

Thanks, im gonna try it.

Thanks, i`ll try the relay and double check the grounds, anything to stop the voltage jumping! it's not a big deal in the daylight but its crazy how much 1 volt fluctuation makes the lights look stupid!

Does this mod increase the voltage to the ignition blue wire? I run a 130 amp alt and had to use an adjustable vr (the stock vr would charge at 16v) and even with the adjustable vr I still get voltage jumping between 13-14 volts on gauge? Drives me crazy!

RedFish may be correct on the turnsignal switch being the problem, try just slightly moving turnsignal switch up or down a little while watching the lights....I just went thru this and it turned out the switch was not making contact at times (someone may have headbutted it while installing the...