Search results for query: *

I mounted mine right above the steering column under the dash. Make sure they clear the windshield wiper arms. I use inter locking relay bases. I had to remove the gauge panel to do it. I also by pass the amp. meter and install a power bar there also. It feeds all my electric needs and it has...

Ya that's what I got down to. 49 years not too bad. I'm going to Carlisle maybe I can find one there... Thanks for all your help.... Bear

67Dart273 I ran new wires to the tail lights and the headlights and parking lights. I ran the wires right thru the bulkhead. I put relays in the headlights circuits ( High & Low) I bypass the ammeter and install a hot junction strip and ran all the hot lines from the welding point and the...

My goal was to increase the illumination of taillights and headlights. To include the turn signals. What you're saying is that the turn signal lights should not have been put on a relay. I do see a marked increase in the headlights and taillights as far as illumination. I'll take the turn signal...

I upgrade my Headlight and taillights with relays and wire. I also installed relays on the turn signal circuits. I install new wires from the kick panel disconnect plugs I use two separate relays for the left and right turn signals. I ran the wires from the dash (turn signal switch) to pin 86...

All I put a relay in my turn signal circuit at the connector that is located in the kick panel. Now the turn signal don't work. Can or can't I do this? Bear

mopardude318 What is the small box that your inline fuses wires are coming out of? It left of the battery tray as I look at in your picture. Bearwolf

All I took the dash apart and found burned wires, surprise.. I want to rewire the main power coming off the battery and alternator and the heahlights and taillights. I plan and using relays for all the lights. What size wire should I use for the lights and what size for the main power from the...

thanks

ALL What gauge wire do I need to re-wire my head lights and tail lights? Bear

Look here... http://www.wiringproducts.com/contents/en-us/d102_crosslinked_sxl_wire.html Bear

67Dartt273 Yes I would like to have one relay run for both the high and low beams, that will be trigger by the dimmer switch. I 'm also trying to use the exsiting wrining that is in the car. My thought is I can power the block of relays from the hot wire that is current running to the...

All Can I run the pauly v.100's relay as pictured in the picture. The yellow boxes are the relays. Bearwolf

1mean7Dart I installed a painless harness in my 64. I call or email painless several times and got great customer service. Call them. Bear

I rewired a 64 Valiant with an EZ Wiring kit. Pros: 1. It wasn't too bad to install. 2. When I ran into an issue their tech support was very responsive and knowledgeably. Cons: 1. GM wiring colors 2. No back up light wiring. Bear

Looking at how it plugs into the ignition switch, the GRD pong is not use.

67Dart273 Here is a picture of the ignition connector and switch. The Pink wire is Ignition Switch Coil The Brown wire is Ignition Switch Ignition The Purple wire is Ignition Switch Start The Red is Ignition Switch Power The Orange is Ignition Switch Accessory. Thanks Bear

67Dart273 Ya. And here is the email from EZ Wire that told me to jump Ignition 1 and 2 together. The third pic made it easy. 386 437 1077 and Ill walk you right through it. Or its the same as my diagram on page 13 of the manual with the exception of the fact that you will need to add a...

If you have time? 703 853-3473.

Sorry for the confusion....

Headlight relay. Yes the test lamp in series with the battery cable. Yes the key was off.

Replace relay, light back on. Disconnected the coil, light out. tested, it comes back on when I connect it back up.

Found a relay that turn off the light? Replace relay?

Thanks, I get started...

OK, connect the negative cable to the battery and did the test again. Light is on. IF I take the negative cable off the light goes out......

Put the test light between the positive post and the positive battery cable and it DID NOT light up. Good?

OUTSTANDING THANKS....... I let you know,,,,,,

place a test lamp between the positive post of the battery and the positive battery cable?

67Dart273 I rewired the car using EZ wiring, so I don't have the original wiring in it now. Bear

67Dart273 I did turn the key to the accessories., but I did not turn the motor over. The only wire I see burnt is the small one that runs from the starter to the starter relay. Bear