Search results for query: *

  1. rlevs

    318 no start after sitting

    not to be funny but my bronco was like that to not sure why had fuel and spark.
  2. rlevs

    please help

    well i agree if you have power at the socket bad bulbs. but if it is the reverse lights sounds like a nutral saftey switch
  3. rlevs

    why cant msds use solid core wire?

    I think stranded will carry more current. and you can break a few stands and still get electricity, if a solid breaks well your done
  4. rlevs

    Wiring a Electric Fuel Pump to the key

    what i would do is run the hot side off the fuse block to a relay then use the relay to turn on the fuel pump. key hot to relay switch to ground, hot from battery to relay to fuel pump, wish i had a dia. to show you some thing like a fog light setup
  5. rlevs

    Lights

    thanks for the wiring Dia.1969383S
  6. rlevs

    Disconnecting aftermarket alarm system

    or pull the panel and see if there is a name on the controller box for the alarm
  7. rlevs

    Disconnecting aftermarket alarm system

    can you get the wireing for the truck and then compare it to what you have
  8. rlevs

    Disconnecting aftermarket alarm system

    one find out what alarm system is on it then go to it's web page and down load the wiring dia. then print. take the printed copy go pull the drivers side panel under steerring wheel. find the alarm box and follow the wiring Dia. rehook wires that have been added to alarm box and remove alarm box...
  9. rlevs

    Gas gauge woes..

    i have found most of the time it is the ground if you clean up the ground connection and use some dielectric grease this will help. the next is make sure that the one is grounded to the body. i have a meter that checks continuity threw the lines you my want to get one and check the continuity
  10. rlevs

    After market wire harnesses

    take your time follow the directions is a must. another thing that i do is lay it out on the work bench, floor, sperat all the cuicuts out and zip tie electrical tap each one. install the fuse box in location run all the wire in the places were they are going to go to, do not cut any thing...
  11. rlevs

    69 Dart stalls at night when lights are on and idle drops at stoplight

    it does not sound like an electrical problem but your carb sounds it like it is out of tune. i had a freinds 64 Buick Special and redid the brakes and fuel. as the brakes went out 2 years before. well got it running and it surged and had to two foot it but after carb was tuned in it ran great
  12. rlevs

    anyone running an msd blaster coil with a tach??

    yes you have to run it to the msd box thats what i did and it works great
  13. rlevs

    Installing autometer fuel gauge help....

    I was going to pipe in but it looks like you have enough help already
Back
Top