Search results for query: *

You only have to get about a 1/4 turn and they will back the rest of the way out with your fingers.

Fishy, I don't think the headers added much. I would not put them on if the manifolds are still sealed up. If they start to leak, then you might want to put them on. I actually need to get it in the shop this week to do the first after driving tightening, which is not going to be much fun with...

I just fixed the "ticking" on mine, here is what i did. I bought headers, figured if I was gonna take an exhaust manifold off i wasn't going to put it back on. Drivers side I took the master cylinder and brake booster off for access. Alot of the heads on the manifold bolts had rusted and were...

I put one on my 70 dart. The only problem I really had was with the tail pipes. They advertise that you can use stock type tips. Mine didn't fit too well. Sent them pictures and they said the wrong tailpipes must have been in the box, so they sent me a new set no charge. have not put them on...

I put a set of Dougs on this year. I took a set off (they look like the hookers, but i'm not sure if they were) they had been hammered in to clear and the steering column would hit if you turned right. When I put the Doug's on they were hitting the drivers side torsion bar and the steering box...

318 Bored .060 to 328 268/280 .477/.480 Doug's headers, 1 5/8 2.5 " X pipe Pypes Violator 2.5" Tailpipes w/ tips Idling and Reving http://www.youtube.com/watch?v=9eQffXbIjGI Driving http://www.youtube.com/watch?v=-wq8qKU0t6s

I hate to bring you something else to worry about, But i got my dougs on a while ago. I had to move the engine over to get them to fit, but the last headers didn't fit right either. But i finally got the headers and new exhaust on and it sounded like the drivers side manifold gasket was...

i took the flowmaster 40's off my dart, they are for sale. probably about 1,500 miles on them. They are loud though. I'd like $100 for the pair plus shipping. Steve

I am having problems with my dougs headers touching the drivers side torsion bar and steering box. I took the engine mounts out (they are about 1.4" thick). With no mount on the passenger side and the 1.4" mount in the drivers side i get about 3/4" gap between the torsion bar and headers on the...

So I finally got back out to the garage to continue working on this issue since I would like to be driving the dart now. It appears that the engine is centered in the bay, so i need to move it to the passenger side 1.25". I've been using a couple small wood blocks as spacers to get some ideas of...

try this http://www.pypesexhaust.com/sys-mopar.html they sell down pipes too. I bought a system last fall from summit for about $300, haven't gotten it on yet.

The rubber insulators on my mounts look like they are at least an inch thick, maybe a little thicker. I am assuming that they are the thicker of the two you are talking about. Still haven't gotten out and measured yet, trying to get the house cleaned up. And you can see how well that is going...

Thanks for the info! When i get back out to the garage I will get the tape measure out and check the engine locataion. And I definatly wasn't suprised with this response! I've seen several threads disscussing the differences between the two. I'm glad yours worked, i'll get mine to work...

Hi, So I finally got motivated and got my new headers on. Another project i did during this one was to change the power steering box over to a manual steering box. So i cut my old headers off and changed the boxes and put the new ceramic coated dougs headers on Saturday. They went in pretty...

thanks for the link!! I think I will get them from year one, they aren't stainless but they are half the price and won't charge me $36 for shipping. Steve

the tips have hangers on them, here is a link: http://www.yearone.com/serverfiles/fbshopmain2.asp?cat=A Does anyone know what goes on the car that this mounts into? and where I can get it? Thanks, Steve

Hi, I have a new exhaust for the dart, and now it will have tailpipes. So i also bought some new stock looking rectangular tips. What type of hangers are used for these tips? There is nothing on the car now, and i was wondering what everyone else was using. Thanks, Steve

looks nice! I gotta get around to getting my new headers and pypes exhaust in. I also bought band clamps instead of using the clamps they sent.

the pypes system is also stainless. I'm getting ready to put my new headers and pypes exhaust on

could you put a band clamp on it?

i just bought a full exhaust system from pypes. I haven't put it on yet so i can't tell you how the mufflers sound. But I will be taking my 40 series flowmasters off cause i want something different sounding plus i'm upgrading to 2 1/2 inch. Pypes also sells parts for exhaust systems. They...

i got that feeling too! Drove through Talmadge yesterday and stopped at Summit and got my new dougs headers (ceramic coated) and pypes exhaust (409 stainless steel). and they are all "test fit" on my living room floor right now.

i'm thinking about doing a full exhaust upgrade which will replace my 40's with spintech pro-street mufflers (loudest that they make for street cars) and the 40's i have are offset inlet/center outlet dumped

just read throught this as i am also thinking about doing a complete exhaust on my car this winter. I was thinking TTI, but after looking at prices, Dougs can be had for $540 at summit. The only thing i don't like is that TTI gives you alot of information about fitment and some pictures. I can't...

thanks for the info! I thought no one was gonna respond. I haven't bought anything yet. I have been thinking about replacing the complete exhaust. I want to replace the old low hanging headers, 2 1/4 inch pipes and flowmasters. I was thinking about TTI headers, Pypes X pipe system and the...

hey! could we see some pics of that? i'm looking at the 2.5" x pypes system with spintech pro street mufflers. The only thing i am worried about is the offset on the mufflers. So pics and sound clips would be awesome! thanks, Steve

hey, i got looking around tonight on this board and was wondering how many people are running spintech exhausts. A guy i used to work with put one on his 99 Dakota R/T and it sounded good. I was looking at some clips on youtube, but its hard to get a feel for how they sound. Everyone uses...

After gettin my car running with the rebuilt 318 last summer, i didn't want to put the exhaust on. The 40 series flowmastes sound awesome, but open headers sounded great! nothing like your neighbors 3/4 of a mile away hearing you start your car up inside the garage. but $300 is a little...

i knew i needed to get a set of real box end wrenches. I do love my gear wrenches though. Thanks

this is my first experience with headers. I am taking them off to take my 273 out. They have stainless 12 point bolts holding them on. I got all but 3 of them out so far. Cylinders 1,2,8 still have one on that i cant get too. The tube of the header interferes with getting a socket onto it. I...