Thank you! I also have the 2 rods and bellcrank parts available. Just send me a pic of what you need. I have the throttle brackets for most mopars 1963-1978
COMPLETE kit includes throttle brackets, linkage bars and rods.383-440 with 727. Will fit B. C. E and possible A body's. See attached. Pics. $100 includes shipping to lower 48. Some small block kits available soon.
WOW!! so every 65 c-body uses that bracket and all 65 B and RB blocks are cast with those 2 mount/threaded bosses. If they were installed in a c-body. I don't normally take the k-frame out of any c-bodies, I mainly use the imperial frame pieces. I don't have any 65 k-frames. I just don't...
I don't claim to know everything about a-bodys, I haven't seen any c-bodies with that mount bracket installed on the tapped holes. To be fair I'll sell for best cash offer, if not I'll stash it for use in a 68 valiant 2dr. post. Thanks again for all the info.
Thanks for the info!! I didn't know all 383 blocks had the drilled 2 bosses on driver's side front of block. I'm sure Shumacher or some one makes a adapter motor mount to put b-block in a-body k-frame, I have the bracket to make it like factory big block car. Thanks again.
The block and bracket are for sale to the first cash buyer. I could trade for sure-grip, with 3:91 gears. Will crate and drop off at fastenal,, or shipper of your choice, possible delivery to L.A. area, so cal, Vegas, Utah, Montana, so Idaho. Have semi-driver goes to Ca. weekly. I'd like to...
Just got back in town, I have looked high and low for a vin on this block and found nothing. I got this in a pile of mopar parts the guy had collected for years. I'm going to answer all inquires asap. I've been gone to see family in Utah.
Let's clear this up now!! I have looked for number behind the driver's head on the lip that mounts the bellhousing, also on pass side, the pad located above pan rail at bottom of block, pad below the dist mount, all to no help. On the pad below the dist mount is stanped D 383 then farther...
The #s are stamped on the block between the decks in the front of valley cover, also what rocker arms are on it? the price is for the complete engine, intake, flywheel, bellhousing? will you crate for trucking co. near you??
Brian, Have you paid for "your parts"? I'm not aware that YOUR PARTS were paid for!!! Please let me know when you have paid for YOUR PARTS. When you have paid for YOUR PARTS I"LL SEND THEM TO YOU, MIGHT HELP IF I HAD YOUR ADDRESS.
Brian, Yeah, I'm semi-retired so I know about how hard it is to still have a car habit. I have sold both the intake manifolds and linkage shown in my ad. However, I will look and see if I can put another linkage set together for you. The stuff on e-bay is way over-priced. I'll look and mail...
Brian, I ran a demo derby team of 6 guys and I saved all the little pieces that get stripped off, Imperials were my choice so I had alot of mopar stuff. The a-body parts all came from old dodge guy's stash. When they outlawed Imperials I just started to restore, I build the motors, and I have...
Brian, sell carb rod, throttle bracket, bellcrank,down-trans shift rod $75 plus packing and shipping from 83401, last one shipped for $19 to georgia. Only got one set left that's ready to go.