Search results for query: *

A lot of good information !

I was reading on line information from Holley about carb. set up, and they had a small note that since my car is an auto trans, they say to have it in drive to preload the engine when setting the air fuel mixture and idle speed. I think I will retry the carb adjustment that way to see if I can...

Thank you Inertia, Ok just worked on this Holley, started with fuel level adjustment, then set idle, next moved on to the air fuel adjustment, before I touched the adjustment screws I just wanted to see where they where, as I turned them in they only moved about 1/2 turn on both of them till...

Hi all looking at other parts of ignition system pulled plugs all appear to be light tan in color, have NGK gr4gp plugs, I was surprised at the center electrode it is very narrow compared to other plugs I have seen I looked on line at photos of the NGK plugs and they look like mine so I think...

thank you Bewy and Rusty Rat Rod, I do not see a link to read about timing that Bewy stated in his post, I will see if I can find that book Vizards How To Super Tune A Holley Carb., I also something from Edelbrock but can not rear the print. I just wanted to add that late last night I was...

14deg. base and 40 deg. total, idle is about 750 in park, have a high stall torque converter [ not sure of size] nothing noted on trans, rebuilt paper work. has a superior shift kit installed.

Ok here is the story, I have owned this 69 Cuda for about 12 years bought as a project car, had engine rebuilt by a local Mopar engine shop a Wayne Hyrowick near Allentown Pa. .30 over 318, Keith Black piston #167, Hastings Piston rings, Comp cam 901-16 springs, Comp. cam Xtreme Energy 20-223-3...

Looking to replace my old Holley carb, it is a OEM part from a Ford no service parts available, I see Holley has a Classic 4160 , 0-80458SA and a Holley Street Warrior 4160,0-80457S, along with a Brawler Die cast unit, BR67270 Not sure of the difference of the Holley Classic and the Street...

Hey Trailbeast, I like your idea with the brass elbow, what breather cap with the barb on it, did you use ?

Thanks Tom, I will wait till I receive the new unit and see what happens, if it does not work I may try the way your friend got it to work Dave

Hi Tom, spent Monday July 3rd working in installing the Meter Match, I did what you did , I drained the tank with a manual hand pump [had about 3/4 tank of gas] put 1 gal back in, set the Meter Match to #4 and set that as the low/empty spot, then put in 4 gallons more then tried to set that...

thanks, that's about what I thought to do, they say you should try to get a least 3 points of measurements for the best accuracy

hi Mr. FT, I also have bought the Meter Match but have not installed it , was it hard to get the setting correct for an empty tank and full tank? how did you do that ?

my carb Is a double pumper model 6989 600 cfm,when I called holley they told me is was a replacement type from a ford product, the fuel that comes out in globs is not at the front secondary pump nozzles but appear to come out lower down in the barrel of the carb. is also where the fuel leaks...

thanks for the ideas to check, when I spoke with the person that rebuilt the carb, he did say that he set the floats to the base line, but did say I should fine tune the float level while the car is running, which is what i will try to do, but one of my concerns is that when you move the...

ok last year at the carlise car 2014, show in pa I bought a rebuilt holley 4 barrel carb, with mech. 2nd ardys, from a father and son team from upstate new york, just tried to fire up my rebuilt 318, filled bowls with fuel got engine running but found fuel on the front top of carb near the vent...

Was at a local mopar fan to pick up a pair of bucket seat hinge covers for my 69 cuda, was looking around found a holly street dominator intake manifold for my small block 318 i am having built, i paid 45.00, was this a good buy and is it a good intake for street type mild build 318? I will...

hi , this is my 1st post, i am working on replacing my steel fuel line on my 69 cuda , i just bought a 1 piece line from the right stuff, and i am having a hard time to fit, when i bought my car all it had was a rubber fuel hose from the engine to the fuel tank so i could not see how it was run...