Search results for query: *

I suppose you are best to argue your points with the experts , as that's what I use for reference http://www.thermoquads.com/, and he has a reaally, reaally good reputation. Ask him, he is a member here, and I'm sure he will gladly give you a straight up answer. Who knows the carb. probably only...

Ditto on the 800cfm and 850cfm, unless it has 4847s stamped on the base, that would make it a 1,000cfm carb. The throttle response can be just as good on a two barrel carb. Throttle response is more so related to timing. My .02.

DD, you just opened a whole new can of worms, LOL.

As mentioned before Paxton has been at it for years. I have no experience with installing a Paxton, but I have done a couple Vortech, in newer 5.0L Fords (sorry). They are not hard to install, as far as bolting on... But a little more complicated when dealing with sensors and what not with the...

Wow! A bit overwhelming, LOL. Thanks Adam, it'll come in handy. Giles

I'd have to look at the specs for the 6A, but in general, after market electronic ignition have approx. 14 deg. advance built into them. Therefore with the vacumm and your initial engine timing at about 14 deg. advance, and the box already with 14 deg, you end up with to much total advance...

Oh ya and the carb. spacer a spread bore?

Just a couple quick ? Rob, fuel pressure is ?, fuel filter..., Total timing advance ?, is your vacuum advance connected with the 6AL box (it shouldn't be). Don't intend to undermind you, but most times the obvious things are over-looked. Best of luck, Giles

I had problems with my Thermoquad, when I first bought the car. I really didn't like it, constantly bogging. This was mostly due to the car being rarely driven. So I paid some good money to have a local speedshop rebuild it for me, then I really "Hated" it, so I took it off and took it apart...

Hey Adam, Probably not all the info you are looking for, but it's a start. http://www.thermoquads.com/page203.html You might also try sending Demon Sizzler a PM, if I'm not mistaken he rebuilds them. I'm not aware of any recalls. I hope the link works, I tried 3 times to copy and paste...

Yes Eddy has an adaptor for the cable, I have it in my 4 speed, I dont have the # available at this moment but I can PM you tomorrow with it.