Search results for query: *

Sorry. Didn't mean to vanish on you. Yes that's a good set. Dan

The closest WTtool to you. Mine is in Warren Michigan

WTtool good prices on USA made drill bits in singles or sets.

Sorry Bruce didn see that you have a shiney one.

Bruce I have that tool you can borrow mine if you like. Got some use but works good. Dan

Ink we use Milwaukee and Dewalt. Both are good grinders but the Milwaukee last far longer. Dan

Rob this works^^^^^. Instead I bought the fuel tank coating. Probably was the same thing. Dan

This is our monster. I piped it all in schedule 40 black iron. Started with 2" down to the 1/2" drops. Piped all over our 5000 sf shop. Dan

We have two Modine 93% units in our 5000 sf. shop with 14' ceilings that work very well in our heavily insulated building. They were initially almost double in cost of the other brands but in the 5 years we had them they more than paid for themselves. Dan

Have your HVAC guy price a ceiling mounted gas fired unit heater. Put it in the corner opposite your biggest door. They're not too noisy and the new ones are 95 to 97% efficient. That small of an area would be easy and economical to heat after you insulate the ceiling.

The angle iron as suggested will do the best job for you. Don't butt the pipes together tight because they'll warp (pull) when you weld them. Instead keep a slight gap between them about a little less than the diameter of your weld rod or wire. Tack the pipes in 4 places with short tack welds...

65BCODA Beautiful tile work!!!

I think the 19/32 is for the water pump on a Ford flathead. That is old.

Welcome to the site. Lot's to be learned here just don't let some of the comments bother you at all. It's eaiser for some to be more sarcastic on the web than they would ever be in person. Tell us about your Dart please and some pics if you have them. And again remember you'll learn more...

My experience has been that our Menards not only sells the vice grip brand but also has a sale on them now and then. As we're both in the same state I suspect your Menards would do the same. Dan

You'll be ok just get it up off the concrete on a nonconductive base and don't forget to drain the water off regularly. I think what some others were trying to express was that air can be compressed and water cannot. You can buy 1000psi solvent welded pvc pipe. It's eaiser to use and doesn't...

It's tough to beat the new T-5 flourescent light fixtures. They have 5 four foot bulbs each and throw a ton of light and hardly spin the meter. The bulbs seem to last forever as do the ballasts and they're not affected by heat or cold. We put up ten in our building and it's twice a bright as...

Like the man said. Michigan Made!!! Sport