Search results for query: *

What is the mod for that mount? Rather than using a bunch of washers. Cutting welding required? Or just a custom mount?

Not sure it is pretty faded paint

Sir! Yes sir!!!

I have an original 318 car... will I have to modify my engine mounts to make my 360 fit? Or will it bolt right into the original k frame? For some reason I recall having to cut part of my k frame to make it fit??? Any tips or links for the custom mounts?

Picked up the engine and transmission. Felt almost like I was going camping. $140 for ‘76 360 core and 727 transmission pair.

I am set to go buy this core for $100 non running. But yes I am only interested in the crank and block itself. Pistons heads and intake and Cal all being replaced. I will definitely get this block sonic tested prior to building. Do you guys know if the 727 transmission from the same...

Copy thanks

Are there bad years to use as far as 360’s go? I have an opportunity to purchase a very cheap ‘76 360 block that needs a full rebuild. I am looking at it as a potential streetable hot rod build. Assuming the block is not cracked, and is a good core, are there any down sides to this specific...

I’m sure you’re correct about the strength. I am copying the exact blueprint from a previous build. Not trying to reinvent the wheel. I know this engine makes 400hp with pump gas and zero fab work other than engine block machining. I don’t have the expertise to know if 340 rods would change...

I am copying a build a while back from hot rod magazine. Not going to reinvent the wheel here. KB 167 pistons hypereutectic Pre gapped Moly rings mogul’s Magnum heads later models MP single plane intake manifold Comp cam 280H magnum camshaft .480-inch lift .040 bore oversize 1973...

Yes, hence the “bore”

Nice!

It’s exactly what you said “crusty ****” Lol

Yes sir!

Just posting an update on the tear down of my stock 318 engine before I send it off to the machine shop for cleaning and boring. If the block is tested and found to be in good shape I plan on boring and stroking the engine. Pictures below. I wonder if anyone can tell why it was running so...

Copy thanks

Pull the intake manifold to check valves? Or is that just a simple valve cover removal?

hi guys I got an original 68 2bbl 318 engine runs but very VERY rough. I am looking for sequential order of least invasive to most to try and figure out what's wrong with the engine. Any HELP is appreciated. Video of engine running yesterday attached. Little run down on the engine...

engine pictures...

Hi everyone, My newly purchased 1968 barracuda and the little 318 sitting in it has been sitting for over 9 years in a garage. I know there are many many variables as to whether or not the engine is even viable, however, if we are to assume that the engine is in good shape, what are the...

john27pa......did you need a rebuild kit in order to clean the carburetor or did you just clean and reassemble? thanks just curious.

will do. thank you!

well well! i'm sure you guys were right about the gunked up jets because i used some carburetor cleaner and sure enough it fixed the problem. thank god! i was dreading opening up the carburetor to find something very foreign to me. i think the carburetor was in need of a cleaning before...

hey guys, might be a dumb question, but is there any reason to believe that a carburetor cleaner spray would also accomplish the same problem by clearing out the passages that may be clogged up?

okay i am going to take the carburetor off today and clean it out and check the floats. it's my first time doing this so i am using the videos from online...anyone have any suggestions or things to watch out for? any trick of the trade are very much appreciated as i am a newbie at this...

okay ill try that technique. and if that doesn't work ill try taking the top off. i hope don't have to do that though. thanks for all the helpful tips guys!

okay. tried to stop the fuel flow until it almost stalled out and released the clamp...no changes. why are some other things i can do to try and un clog the carb?

lots of great info and advice guys thank you all! i am trying to send a link to a video of the carburetor. i hope it is below: http://youtu.be/cCBCuzZjKR0

okay ill take fuel line off and inspect the fuel line fitting that connects the line to the carb.....

no no i didn't take the top of the carb off...i just took the air filter off and looked down inside it.