Search results for query: *

The short answer is no, the floor pans and frame cutouts are completely different. I attempted to put a used A-Body exhaust in a E-Body and took some effort to make it work. In short I just bent it low to clear stuff, in no way was it good, it was temporary so it didn't matter. Alan

Factory ones in the 60's were made from recycled tires. Alan

1963-73 225 Slant/6----All Models Quality stuff. Alan

I have unbolted the manifolds at the heads and popped them over the studs, takes a little effort but it can be done. Alan

About 1990 I put the 273 out of my 67 Barracuda into my 73 Barracuda, the 73 had no exhaust so I tried to put the 67 exhaust in. The head pipe hit something and made the muffler hang low, way too low to be practice. I ended up having the pipe to the rear of the wye replaced and ran with just a...

Correct, ALL cars in California regardless of year must retain all factory emission equipment. If your classic is spotted blowing out smoke and you get sited you will have to pass an emission test that includes the under hood check. Whereas this is true I have never heard of it happening. Alan

If they are open headers noise will be your issue in some states like California. Alan

Unlike typical "fix-it" tickets, with this new law fixing it will not reduce the fine. People would "fix" it, get it signed off, then put the loud system back on. New law, problem solved. That is the only thing that changed, the levels have not. NO car regardless of age is exempt from the sound...

here is one... NOS 2823497 MOPAR EXHAUST HANGER 67 68 69 70 71 72 73 74 DODGE PLYMOUTH CUDA GT | eBay Original mopar number 2823497 Alan

I believe this is basically what was there, there were variations depending on year and engine size. Hanger, main support, A & B body with 1 7/8 (D-746-Z) Alan

Like a lot of reproduced parts one part is often sold as correct for many years, this is the clamp both my 67 & 69 have. Alan

But that kit doesn't include the OE style clamp, if you want the OE style hanger you want the OE style clamp. Alan