Search results for query: *

Yes it does Mike. Always has,I'm sorry that I am not on much anymore. Miss the old times,we had some good ones!

Thanks guys, makes sense now because tach was removed.

Tried to figure it out from online info but I'm lost. Knew you folks could tell me. The white wire with the green connector leads through firewall and ends up inside just hanging ,not connected to anything. Is this a ground? Thanks for your help.

All I can say is , nice car !

Normally I sit back and read threads like this but I feel I have to voice my opinion. We have all read ssdan's statements many times and basically take them for the truth.Now comes a fabulous (or so we think) product and we seem to choose to look the other. When these lights I could only think...

I talked with another locksmith and we both agree that it is not a transponder/chip type ignition.Gm was not in the habit of putting transponder ignitions in their lower end models.When you forcibly remove a key when any lock cylinder is turned you will physically damage something,in this case I...

Hey Snake,I have been reading this thread and trying to stay away because i stopped doing automotive work a long time ago. If the key was forcibly removed in the on position you may have damaged the tumblers in the switch.The switch is mechanical as well as being hooked up to the computer.It...

One of the guys in our group used it and had nothing but good things to say about it.

Just a guess but if you put them back the way they were and they work it probably is the horn. A friend gave me a box of horns,some didn't work,I gave them to my Dad and he fixed a couple so I'm thinking they can be fixed,probably not worth the effort tho. Just my .02 8)

I changed mine from this: To this: Cleaned off the paint below the nut.

I like that answer.I could make you a key in 10 minutes,but I ain't there.:-D

Funny how that happens.:-D Not the first time I have seen it happen.8)

Nice work.Sorry for the dumb question but is that aluminum?8) On second thought I looked again and it is,duh.

Yep,pull til you hear the first click and bingo!8)

The only reason for driving the retaining pin in is because you don't have a key.If you have the key put pressure on the retaining pin and turn the key until the pin depresses and remove the cylinder.Follow same process to install new cylinder.8) It's been a long time,not sure if you have to...

Not sure what year the buzzer contacts were put in the ignition but it is quite common for then to break off and drop in the keyway.the broken piece is usually a small flat round piece of brass.If you got a buzzer when the door was open and the key in the ignition then that is probably what it...

Right you are Waggin.The best lock to take off is the passenger door because it will be worn less and easier to determine what the actual pin lengths are.There also may be a code on the the door lock which eliminates the need to fit a key.Should be an "es" code,if I remember right.I would fit a...

Nice car.Nothing to appologize for.Welcome. 8)