Search results for query: *

Thanks all, Got it done.

I thought the principal was the same, just not in a vise and 2 people required....Thanks

This might sound stupid but, can I bench bleed my MC while it's in the car. I installed it and after getting no pedal, I remebered reading something about bench bleeding and here I am. Can I Just disconnect the lines and have someone pump for me while I hold the tubes???? :o

Yeah, but I am mounting it to my Dana 60 and want to weld a bolt to the housing but I would like to make it look similar to that setup. I want to see which angle the tubes go to each side of the rear end. Hope that makes sense. :D The rear I just took out was custom job to so can't compare to that.

I am trying to determine the position of my t/y block (its not really a t or a y) anyway, how does it mount on the 8 3/4 rear housing. I am going to weld a bracket but want to get it some what looking like it should position wise. (if that is possible) lol

Thanks, I'll be going to "Right stuff" also. good reviews here on FABO

Any ideas on a good manual master cylinder to use for 4 disk setup? Some are saying older dakota (1990) aluminum with 2 bolt converter plate?

That is a little on the pricey side considering how much I've spent so far. I may look at that down the road. This might be a dumb question but, I have a new master cylinder now for Disk/Drum, can I just remove the booster and use the MC that I have or is there a difference in man vs. power...

Should I convert to manual brakes?

I have stock front disk 72 and converted rear to Disk with not much stopping power. After reading multiple posts can't get a definitive answer. First, I am going to guess with big cam I might not have enough vac (18 required) but also, I have the stock Disk/Drum Master on my 72 Duster. Where...

I used a 1988 S10 4wd (bleeder off the side) caliper and a nice beefy 1995 Grand Marquis Front rotor with my own braded lines. Nice cheap if you do it yourself. one of my mechanics did mine. Brackets should be available on the net.

I'm having similar problem. No stopping power.

If anyone can chime in with part numbers that is always appreciated! I want to do this also, My booster is dead. All Disc. Thanks Much!