Search results for query: *

  1. V

    4spd???

    Follow the link below to find all information about 833 4spds, and more. Mike http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm
  3. V

    4 speed clutch and trans linkage questions

    Not sure if this will help you any, but i'm attaching a link to Mopar 833 trans page, which goes over various linkages, clutches, trans, etc. Mike http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm
  4. V

    Bought an A-833

    Check this link. It may info you can use. Mike http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm
  5. V

    Does this 833 sound good?

    Below is link to all the 833 info you'll probably ever need. It clearly explains all the different variations of the 833. Mike http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm
  6. V

    64 four speed shifter boot

    Check here. Mike http://www.gvgovier.com/
  8. V

    Strength of a a-833 with a 25 spline output

    Sorry, heres the link. http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm
  9. V

    Strength of a a-833 with a 25 spline output

    rklein383, below is a link on 833s that may help you identify trans you bought and probably any question you'll ever have about 833s. Mike
  10. V

    Strength of a a-833 with a 25 spline output

    I just grabbed this out of a link on Mopar 4spds. Strength Considerations Chrysler engineers decided that Hemis required a beefier input shaft so the standard 23-spline shaft was replaced with a beefier 18-spline unit and a larger input bearing was used to accept the additional torque. Later...
  11. V

    66 A-833 identity problem

    Check this link for info on 833s. Mike http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm
  12. V

    A-833 Decoding Needed

    This link will provide you with some good information on the 833s. Mike http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm
  14. V

    64 four speed shifter boot

    Hey Lee, if you are looking for door panels for your Valiant I bought some other parts from a guy and he had some pretty clean blue ones for cheap, if you are interested. Mike
  15. V

    64 four speed shifter boot

    Lee, let me get this right. Are you saying that the plate in that pic is only $57? That seems really cheap. I think I'll put my name on that list. Mike
  16. V

    64 four speed shifter boot

    Heres' a pic from the side I just took. I'll tell you one thing, I'd wrap a rag around it and drive before I would buy one from Laysons. Mike
  17. V

    64 four speed shifter boot

    Actually, the boot is formed to lean forward or reverse, either way you want to install it. It is definitly not formed straight up and down. Also the chrome ring is the right size to fit the factory hump. If I get a chance I'll take a pic and put it on here. Mike
  18. V

    64 four speed shifter boot

    I looked all over for that boot and ring for my 4spd 1964 Valiant, and could only find the $100 which I feel is ridiculous, so I just bought this one on Ebay and I 'm going to see if I can make it work, even though I have a squarish type Hurst shifter. Mike...
  20. V

    A-833 or A833 OD?

    OG, take a look at this link. It'll give you alot of info on the 833s. Mike http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm
  21. V

    A-833 or A833 OD?

    I beleive if it is an overdrive 833 the input bearing retainer should measure 5.125". larger than the regular 833. Mike
  22. V

    Buyig a 4spd trans

    I beleive that that location would put the shifter towards the rear of the car a significant amount, but I am by no means an authority on this. Mike
  23. V

    Buyig a 4spd trans

    Check this link. It should tell you what you need to know. Mike http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm
  24. V

    B body to A body swap

    Check this article. It shows some differences in the two.http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm
Back
Top