Search results for query: *

Those are for the front. And I’m not sure if they will work on a 66. May be a different contour that follows the fender shape.

true, I did forget that the ignition switch is different from every year, and this switch is a 67, so that’s what these came from. The door locks themselves would probably interchange, not sure about the rods to go to the latch mech, and I’m not sure about the trunk key location, but the trunk...

Howdy folks, up for sale in this listing is the lock and key set as removed from a 1967 Barracuda Notchback. I do believe they fit all 67/69 A bodies, but they came from a 67 Notch. Included are the ignition switch, door locks with rods and clips, trunk lock with clips, and matching keys for all...

Howdy folks, cosgig here. Up for sale in this listing is a pair of full quarter panels removed from a 67 Notchback Barracuda. Of course they work for 68/69 if you drilled and cut the side marker holes. Here’s the details… first of all, I didn’t cut them, I got them in a deal with a bunch of...

That’s for a 65, and will fit a 64, but not a 66

Howdy people, cosgig here. Up for sale in this listing is a pair of wiper arms as removed from a 1969 Barracuda. I’m sure these are pretty straight across the board for a variety of years and models, but they came from a 69 Cuda. Details… nice shape, no problems or damage. Springs are good...

Sold to LocoMob. Thanks Scott!

Howdy people, cosgig here. Up for sale in this listing is a set of 67 Dart GT exterior emblems. Here’s the details…. All 4 emblems included, the grille center, both front fender emblems, and the trunk panel emblem. All in nice shape, the fender and trunk panel emblems are in really nice...

You may be right Rob, and I’ll switch the info to include just 66. If someone really wants it, and they have a 64/5, they’ll have to research that themselves. Thanks for the heads up.

Howdy folks, up for sale in this listing is a rear window and gasket correct for a 1966 Valiant 2 door Sedan. It may fit other years and models, but it came from a 66. There nothing wrong with either piece, although the gasket isn’t as flexible as new rubber, it’s not being reproduced. the...

The floor pan has found a new home. Thanks FABO!

Howdy people, up for sale is an OE one piece floor pan as removed from an early A body 63-66 Dart. I was going to use this for my Valiant, but am now selling the car, and also didn’t realize that it was for a Dart and is 3” longer in the rear footwell than a Valiant/Barracuda. Here’s the...

All Factory small bolt pattern Rallyes rims are 5.5” wide, unless aftermarket, then they could be anything.

since your inbox is full, I will pic the correct lock mechanism for a 65 A body here, and maybe the OP can pic his up close for you to determine if his will work or not.

no, it will not.

The turn signal assemblies you have listed go in the front bumper of the 66 Cuda or Valiant. the headlight bezels may be from a Valiant as well. I’d like to see the side profile that faces the inside of the grille. It would be thicker than the outside edge, with the bezel oriented so the...

God bless you, Chris, you’re a good man. I don’t need em, but I applaud you for offering them up to those that may!

Ok gang, this item is sold. Thanks 66, and thanks FABO for the ad!

Howdy all, cosgig here. I have here for sale a passenger side grille assembly correct for 1966 Barracudas only, it will also fit a 66 Valiant, but is correct only for Barracuda. Here’s the details... This grille is in very nice condition, no cracks, breaks or damage of any kind. There is almost...

67-69 Cudas all use the same bumpers and brackets! The bumpers are the same front and back, the brackets for the front fit all 3 years, and the back brackets do as well! I believe that even the end stabilizer brackets are the same front and back!

How are the top corners of the grille section, Matt? They are usually broken right at the corners from the hood slamming down on them! Hard to find without damage there!

Can you show a picture of the back of the "M"? There is a difference in the pins on the M, and only on the front of the 66. Straight across pins= rear letters Canted pins= front letters

64-5 only

My items arrived safe and sound as well, and they're going to clean up really nice!! Great deal too!! Another happy customer here!!

With just a little alteration, it will fit the 66 as well! The end needs to be opened up a little to go over the larger tang of the 66 taillight, and I believe the clips are different! Changing to the stainless trim on the 66 is, or was , the new hot ticket, as the aluminum spears are usually...

That is 64-5 only, 66 had individual letters across the front of the hood!

Howdy all, cosgig here! Up for sale in this listing is a pair of hood inserts correct for 1967 Barracudas! They'll fit 68-9 as well but are correct for 67 only! Here's the details... These are in pretty nice condition, some minor pitting deep down in the grooves, but overall they look pretty...

@Tadams

The housings are different from year to year, not one is the same as any other year!!

As Mark mentioned above, he has bought and paid for these and they are in their way to him!! Thanks for the interest gents, I really appreciate it!! Geof