Search results for query: *

correct definatly restrict

I wont run anything but full groove on a small block. If you are going to run any kind of substained high rpm I would strongly recomend it

What kind of fuel injection are you going to? Which motor, the magnum or the old A.

Got my stuff from Mancinis. Believe you can get everything directly from them. Have some paitence when your doing it because it is a *****.

running 14 to 1 on mine with no problems. Was worried about it to begin with thinking i might have to o ring it but after 2 seasons no problems an i have had the heads off 3 times using the same gaskets. Make sure you retorch after you get it good an hot. My thoughts would be a warped head or...

this geometry problem is not a new thing. Running a harlon sharp set up with mine an it has taken alot of time to get it right. Changed pushrod lenth to get a little better angle an keep from rubing. had problems spliting rockers but got some updated ones frome harlon sharp an think i have...

Just read you have the r3block so dilling is good. If you are running a roller set up one of the lifter galleys need to be blocked to keep oil on the bottom of the moter. Any constant rpm over about 5500 will starve the bottom end has been my experience. Turn mine right at 7000 an have had no...

You need to modify the hell out of the oiling system to keep it together with a constant high rpm. run a dry sump system on mine an even had to go as far as feeding it oil from the front too to keep the bottem end from starving. One secret that has helped me is fully grooved bearings. You have...

Yes split right around the shaft. Dont have a camera for this or I would send a picture. It was one of the small ones so I always carry a spare in my race box. Anybody else ever had this problem?

I run Halon sharp an have split a couple of rockers before but never had trouble with them walking. Noticed the new ones are a little meatyer so they must of had a little problem there.

What size fuel lines? I would try a different distbuter too.

have had really good luck with crane