Search results for query: *

having a big block, i went with the biggest core that would fit and I'm really happy with the way it worked out. i think it is the 26" wide 2 core core champion. It just fits between the factory overflow and battery tray. never gets hot, even when i took it to florida in the dead of summer.

im using the jaguar clutch qith a chamion radiator in my bb duster

is that a 400? you using the funky passenger side drop water pump housing? i didnt do the body filler on my shroud yet i wanted to make sure it was really doing the job before putting anymore work into it than i had to. im really happy with it though. with my 400, so far ive only gone a hair...

NO. maybe when i get it all done. all said and done, i spent 85 bucks BUT i bought way more than i needed for a fudge factor. a gallon of resin a piece of 5/16 or 3/8 mdf because i wanted to be able to really strech it into shape if i had to and 2 yards of fleece, which i found when making...

i did the fiberglass one right after seeing that post. i thought of doing it but ive made the speaker enclosures but i just couldnt figure out a good wy to make the fan opening, until i saw that guy's site. our temps dropped so i cant do a fair comparison but i have been driving it daily the...

my car is a big block. i didnt have a fan at all so i started with the hayden 18" fan and jag clutch. it is close to the upper hose, maybe 3/4" away. i used part of the lower hose off my slant as an upper hose.

yeah it was annoying. when i asked what size tubes he never answered me i asked more than once. when i asked the thickness of the core it looked like only the 2 row would fit, when i got it the core was much thinner so i contacted him to possibly swap it out for the 3 core, he then told me the...

i have the 26" 2 row from the guy on moparts, i couldnt get an accurate measurment of the core thickness on 2 and 3 core. so i just went with the 2. what size are the tubes in the 3 core? i heard the 3 row has thinner tubes than the 3 row. that was another thing the guy couldnt tell me that i...

im using the 26" with a big block, i think with the engine offset and hieght of the BB, ther eprobably isnt a factory shroud that would work. i very rarely have problems with the temp but when it does creep up its in stop and go, a shroud would help for sure. i was thinking of either aluminum or...

i used the vinnegar it works real good, but so doeas radiator flush. i cant really say one works better than the other.

you know, i couldnt get a good answer on tube size or core thickness from the guy that sells the champion radiators on moparts. he was giving me dimensions to the top tank never answered what size tubes they use. when i told him i had way more room he did tell me the 3 core was only 3/8" thicker...

i bought a 26" 2 core for my big block duster by mistake. i didnt know a 3 core would have fit. i used it anyway. i just drove it 3000 miles to florida and back. it was hot as balls. i was pressed for time i put the rad in and a 180 themostat, it went over 160 2 times in 10 days. once in stop...

i have one of those fans too and was pissed when i saw the rpm limit. i dont really know how to take it, when you compare it to a stock fan, there isnt a lot of difference. the one i have does have aluminum blades. i would really think an old used fan that has been flexed for many years would be...

im not sure if the early replacement rads are as readily available as for the later cars but you could try chamion cooling they have a few different configurations in aluminum and are cheap.

i wanted to buy a setup from an a/c car but i gave up on that idea pretty quick. people seem to think they are worth gold. im not sure if they actually sell for good money or what.

i used vinegar and purple power at different times

my 74 has a funky overheating issue. its pissing me off. when i got it the rad was backed up. i tried 50/50 water and vinegar to clean the system i kept flushing it every time i drove it but finally got fed up and bought a new rad. it definitely helped i had to keep flushing out the heater core...