Search results for query: *

I’ll measure the legnth and the pin size later this week.

The 505 piston tops are roughed up cause the old man that was gonna ceramic coat the tops. Sadly he passed away b4 he could do the ceramic coating. I got these from his son. Kim

I’ll find a pic. I think .040 could be machined off safely. First 3 pics are the pistons that came in my 543 kit. 1.34 cd and a 26.7 cc dish. The next pics are the 505 pistons. 1.774 cd. I got my .040 from measuring the 543 piston thickness of the dish. The 505 pistons are .040 thicker if...

What was your measurement from the top of the pin hole to the flat of the piston?

That works. So .545+ .105=1.50cd? That’s what you’re saying?

Yes that’s the style I have only seen on 727 trannys big or small block in a car. Kim

The one u r showing us for a 904 tranny. I should have what u need. What size is the ends? Or more impotent size are the holes on the blank and the kd lever. Kim

No, a 4.5 stroke and 1.340 cd is very close to zero deck with a 7.100 rod. A 4.25 crank and a 1.5 cd is pretty much 0 deck. I could also be wrong. Kim

My crank is 4.25 stroke. Rods are 6.8 .990 pins and Chevy size big end. Piston cd is 1.774 13-1 with a 75cc head and .040 gasket. I would like to get down to right around 11-1

V8 ones are a little different. What year is the tranny your gonna be using? I can check my stash. Kim

Hi John, 4.25 stroke. Thanks. Kim

Looking for a new or used set of 4.350 or bigger with a compression distance of 1.50 give or take a few thousands. I have 1.340 cd and 1.774 cd to trade as well. These have .990 pins. Thanks. Kim

John, do u have any carb numbers that these jets will be in? I have 20 or so carbs but I don’t want to be taking them all apart. Kim

I’m not sure the size. I just thought they are probably some odd ball size that MSD used. Kim

Hi there, I’m looking for a few screws to hold the cap on. New or used. Thanks. Kim

1 more pic

Here ya go.

I don’t remember. I’ll try find the ad.

I’m not sure if it is here or on FBBO a guy has made a few and has them for sale. Kim

Your pic shows a 10236. Kim

@Jim Kueneman in the exterior parts for sale. Kim

Do u have a 2 or 4 barrel bracket? I believe Mancini Racing sells both parts. Kim

My 75 Duster 360 adjusts on the bottom like yours does but has the top rod and bracket like in post # 4. It my top rod isn’t adjustable Kinda a mixture of both but the bottom rod is different. Kim

Sorry to hear that. When your numbers up your numbers up. So we can only be so lucky so many times. Best of luck 2 ya.

As we get older our health starts going down hill. I hope you’re doing ok now. I hear ya, I don’t do many side jobs anymore.

I think @moper will build it for u. But I think he is in Connecticut. Kim

This is from my 70 swinger 340 car. My buddy has it now. I can ask him if it’s for sale. Kim. He does t want to sell at this time.

have one if u don’t find any closer. Kim

Way cheaper out that way than here

Good luck Steve. With used prices now u will be lucky to get a mid 90s for those bucks. Too old in my opinion. Possibly a 2000s it will have many millions of miles. Kim