Search results for query: *

so this the cam I'm using , heads have 202 valves , stock bottom end 318 ,with windage tray !!

So I'm building this 318 , 1987 block , 340 heads and manifolds, I have two intakes to choose frome one is a holley street dominator (small ports 318),the other is the factory 1977 cast 4 barrel intake (large ports). So I'm thinking cast one would be better because of larger ports? But never...

So building a 318 for my 67 barrcuda and was gonna paint the motor red , is there a paint code for the red on the engines in 67/68 ??? Went to the parts store for paint couldn't find any Chrysler red color?? Any help would be great Thanks Mike

Bought a windage tray/came with hardware 4 main cap bolts ,8 washers and small attaching bolts , never installed one of these on a small block before ,so I assume you stack 2 washers on each main cap bolt ???? Thanks Mike

Changing from solid to hydraulic because I was hoping to save the adjustable stuff for a more radical build, and I allready have the new cam and lifters ! Will be changing the springs don't want any valve float Thanks for the feed back !!

So took apart my 1986 318 for my Cuda and the previous owner put the 273 adjustable rockers and solid lifter cam in it .Timing chain is shot cam is looks worn out ! So I was gonna change over to hydraulic lifter camshaft, have a comp cam which has 268 duration and a 454 lift, new chain and...

manual choke on this one ,runs fine after it warms up , but if you shut it off its areal pain to start ?

First thought was pluged intake but the water line going into the base of the intake by the carb thru me off . Not sure about the coil will have to check that out, aperently the cap , rotor and wires are new thanks for the help. Mike

A friend of mine has a 318 in a shunt truck , it is hard starting and runs like crap until it gets warm !! Once they shut it off and try to restart 15 min later it's very hard to start again , So they have replaced the timing chain and gears , new two barrel carb , wires ,plugs etc - they...

Ya I bet she would do an awsome job on those , gonna have to fab up some plates tonite when I get home from work!!! Thanks for the help on this. Mike.

La 360 in a 73 challenger Wife's car. Where could I find a baffle kit for these valve covers not sure of brand Thanks mike

I am changing the valve covers on a 360 was gonna put a set of aluminum Valve covers on. These valve covers have no baffles on the inside where the Pcv enters the valve cover. With no baffle cover on the inside will this create any issues with oil being sucked up by the Pcv ? Thanks. Mike

i have a 64 polara 440 auto . this 440 had a 750 cfm eldelbrock on it and it would run okay as long as u were not on it ! as soon as u floored it after 3 grand it would miss fire like crazy :banghead: so my engine biulder tells me its ignition :protest: not have all new electronic !! put a...

lean