Search results for query: *

i have been to the truck forum here and RamChargercentral, but cant find any other really good mopar truck forums.

Its been converted, its got a Carter carb and a edelbrock preformer manifold with headers on it now.

Thanks, do you have a wiring diagram for that truck, and does anyone make new harnesses? Seems like a a A Body or a FMJ car with a V8 Harness would work if the bulkhead connector is the same since the realy and other items are pretty much in the same spot

Hey Guys, you may recall i pos.ted about buying a 84 Ram Charger about 6 months ago. I had to replace the heads and just dragged my feet, and finally got it running again. I have a question about how it starts. Its not stock, it has a 360 with a Edlebrock Performer, Hooker Headers and a...

yes, still using the ballast and a regular coil

I finally ended up putting electronic ignition on the slant. Found a guy on craigslist selling a Mopar Performance kit for $150. Set up went good except i failed to notice they put the hod down bracket bolt hole in the distributor in a different place. I marked the bracket where the bolt...

YAY, just got a Mopar Performance EI set up (orange box, wiring, dist.) for $150 (from a guy with a sweet little Valiant 100) No instructions with it though, Anybody got a site with the best instructions to install, Mopar Performance doesnt have it on their site.

It was only $90, i will send it back to bill, he made the Bee and the 73 harness without any issues.

Hey guys, i called Evens about this, but havent heard back. I ordered a 70 Duster Slant 6 engine harness from Evens. When i called them, he said he had not made one for a while. The Duster has PS, no AC, no other options. The original( or the one that is still on it) middle bulkhead...

LOL Dash ammeter????? just kidding, you dont know the history of the car. Somewhere on here i have pictures of the wiring some whiz kid did on this car. For a exampe, he had a radio in it and for power he had a spade connector jammed inbetween a fuse, and a quarter jammed inbetween another...

The regulator must be internally bad, it wouldnt charge unless i jumpered it. put the new one on and its fine. Oh well, at least all the electrics are new now.

Actually, it was the voltage regulator, jumpered it to ground and checked the battery, nothing, switched it out and it is charging again

thanks guys, i disconnected the Neg cable and the car died.. I was unsure i hooked the harness up correct even though i didnt connect anything until i made sure of the wires. Mymopar shows two single field wires on the Valiant and Dart alternator on the diagrams, but the 73 Service Manual...

Hey guys. My 73 has a issue with the charging system. My battery was dead at work yesterday, so i called AAA and they came to test and replace it. I needed a new bat anyway, but he said it was not getting charged. I didnt see the results though. I checked it this morning, car running, bat...

Tried switching the 70 and 73 dimmer switch, that didnt work, looked at the ground, it was trashed, yrs of being by the battery had done it in, and i probably broke it doing the harness. Stripped and grounded it to the battery and the head lights worked. Fixing tomorrow, thanks eveyone.

just checked that, with the headlights on, i have power at all three terminals, both low and high. With lights off i have no power on any of the three. Bad dimmer switch?

ok so feel free to call me a dork, i was installing the wrong harness, i ordered 3, one for each car, i was trying to put the 70 Duster harness on the 73, oopps. It started right up. Headlights still dont work though.

I friggen gave up, and put the old one back on, cant figure out whats up. Now my headlights dont work. Strange issue, my tail lights and markers work. My headlights, grill lights and front markers dont. I have power at each side of all fuses, i have power at the high beam switch, i have...

So, i bought a engine harness from Evens, for the 73 Duster. The questions i have is hooking the ballast resistor wires up. My Duster has a 4 prong BR. The Evens has a 2 prong setup. I called them, no answer. The Dusters old harness has .... Upper right green/w red stripe to...

i called them, thats the correct price, because they have just started making them, hmmmm, the 73 and 74 are probably the same, 2 side markers, two tails and two reverse with the license plate light and the fuel sender?

Looking for rear light harness's for the 73 Duster, whats up with the prices on Classic industries? 1970 $119.00 1971 $99.99 1972 $139.99 1973 $349.99 1974 $129.99 Is that a misprint? whats up with that?

So i am rewiring the 73 Duster. Gonna buy a dash and engine harness, but i still had my Painless harness i bought for my 71 Scamp i never used so i thought i would rewire the real light harness. First, gotta love the 1 into 6 factory crimp power wire, think i will solder a larger wire in...

Thanks everyone

Hey guys, wondering if anyone has a wiring diagram for a 73 Duster with a electric element rear defogger. Mymopar doesnt show any A body with one on their diagrams. My wiring has been hacked and slashed and i am replacing it, the wiring wasnt there for it when i got it, and there was no...

How well do those Petronix conversions work?

Hey everyone, looking to upgrade the ignition on the 70 Duster also, cant seem to find a good electronic ignition set up. Someone had a bunch of links on the Slant forum a few weeks ago but i thought they were just a petronix set up. Is this all thats available, or is it possible to get a...

The brake lights quit working on the 70 Duster, so i did some test lighting and found the power was going in, but not coming out of the switch. So i replaced it. I got one from Classic Industries. The brake lights work, but now the flashers wont turn off. I finally just took the flasher...

Sorry been moving havent had time to check things, got a great garage now though. I took the steering wheel apart today, Power is coming from the wire into the switch when the pedal is pressed, no power out but when the hazzards are turned on, the test light flashes on the wire out but the...

4 way switch? You mean the flashers? Yes it does, havent used them yet, i will check later

its probably the turn signal switch, power at both ends of the brake light switch, power at the white wire on both sides of the connector, no power coming back from the greenish wire, gonna look inside to see if there is a easy ground fix before replacing the switch.