Search results for query: *

Neither.......... Alice Cooper

Done. Just need to repaint .

Im making my own

No , the bottom piece with the tab holes aproximently 17"x5"

68 Dart bucket seat back hard shell. Cant find the piece at the bottom. What is everyone doing to filll the space.

Doesnt hurt to try . I had some nitches on the dash and it helped cover them. Goodcthing about Flex Seal is you can layer coats . can says 10 to 15 min. in be tween coats I allow 30

Starting to love this stuff. I bought a lower vynal dash tray cap for my 68 Dart , years ago. I was never really happy with it. Didnt fit right , kept my clove box door from opening all the way. I decided to pull it off and rework the dash. I scrapped and sanded all the glue off. Then painted...

Worked out pretty well. I used a couple coats nust enough to seal seams and cover staples. It does add a little strength. Im sure any rubber coating would do the same

I lke my own

Resin might work but you have to be careful in not adding too much bulk

Thought I would pass this along. Since no one is making plastic glove box inserts any more I thought I would try this. I bought a cheap insert and picked up some Flex Seal as seen on T V. I spayed acouple light layers on the out side . Third coat alittle heavy in the seam areas and staples. Give...

I've never seen a brail dash before

I like it.

My 68 Dart ,cut out the face , replaced it with 1/16 " plexiglass drilled all necessary holes.

Gauges in my Dart were junk . I decided to remake the hole thing. Gauges are Sun Pro and speedometer is GPS. Probably not the up scale your looking for . GPS is accurate and gauges are a huge improvement over OEM

Mine has a sending unit. I placed it on the dash. As long as it can see sky your good.

I got tired of fixing my speedo cable all the time. So I bought a GPS speedometer off eBay . I redid the dash with aftermarket guages . GPS works great and yes I have had it over 70 MPH

I didn't use my cigarette lighter , that's where the switch to my electric dumps go , you can slide the door shut and it can't be seen.

I lined up shifter to floor pan hole first , made sure linkage was straight tac weld to keep from moving placed console on to get shift range correct. My console had holes in the storage compartment that lined up with bracket so that was easy . Its pretty straight foreward . I did a lot of...

I have pictures of my 68 Dart . I can post tomorrow.

I used 5/16 all thread

So are you still thinking Ebody?

This is what I was given when I went to cbodies forum. then did a search and came up with the small picture under 73 Newport.

Has anyone adapted Cbody bucket seats to an abody. Seats seem to be from a73 Newport. Seller says tracks are 13"x16" which are the same as my 68 Dart. Don't know width of cushion. Cushions could be shaved if need be.

I used sound deadener

Their brite , I bought some small LED lights off of eBay and installed them. They shine big for their size.

Yep

There a roller , they should roll free as you crank the window up. If you can't get them loosened up R/T specialties has them and pretty reasonable.

Slightly, I cut about a 1/2" half moon sliver It can be replaced might not even show if I want to put everything back.

Are you trying to get away from the 67/69 style? . like said yes its do able. I always thought if I could make it fit , I would swop the early PT cruiser dash. I have no idea if it would work , never went any further then a thought.