Search results for query: *

:rofl:Damn you Chris. :poke:

Cool, thanks!

Okay, thank you!

Allow me to put this song in your head

Heck take a big hammer and wack it hard and it will pop right off. After you remove the nut of course.

Speedway, Summit, Jegs.

I have a set of 245/45 x 20 Kumho tires on the wife's 300S. They wear well and handle well for a lesser price than some of the name brands.

I agree, I wouldn't want to have that in the back of my mind either.

If the oil sump pan is off you can block the crankshaft from turning.

Yes, the vvt and non vvt is clocked different. Everything looked good when it went together and came apart with new o ring. I'll replace the oring this time as well. I've read threads on other forums of similar oil pressures. Actually seems pretty common... I just don't want to be thinking about...

If up grading, use either a drum master cylinder if you are using drum brakes of a drum/disc and a proportioning vale master cylinder. Make sure the components match.

Does here for that same reason. $.60 in the last month.

Yes, I've seen '67's with a bench and column shift, just haven't seen one in a '66 FS. It may be due to the '67 being a BH (high) price line, and a '66 being a BP (premium) line. In '66 Bucket seats were standard. As you mentioned, there were all sorts of combinations that could be special...

Drill two holes in the square part of your bracket and attach a long handle. Done.

So the price doesent change in the south?

Thank you!

I can only imagine night vision would be terrible

Appears that i have 340 brackets, but the bracket that i have pictured on the right, has the holes drilled for the rubber insulator, on the opposite side. Would that, does that, make a difference?

Mine is an abbreviation of my first and last name.

On some motors, they are side specific. The GenIII Hemi is one, they are machined for a certain side. But on the LA motor like yours, the heads can go on either side. The intake then blocks the rear coolant ports in the intake face of the cylinder head so coolant only flows out the ports on...

I’d like to know what you find out. I wasn’t aware of ECS as a vendor and checked their web site. The best price I have gotten for a rear windshield from a well-know vendor was $1500. ECS shows $500 for the rear and $450 for the front. Thanks for the information.

yeah crappy here also

5/16 or 3/8 line?

Stay away from the coast you need to be approximately 40-50 miles inland to minimize hurricane damage. Property insurance is insane currently I hope the state legislature can straighten that out soon. Home prices are still high, but I believe that's about to change. As far as schools go, I would...

A punch list on the windshield or steering wheel is best. You get in look forward and go “damn!!!” Get back out and do whatever is on the note.

Still cold and gloomy here this morning and is supposed to stay that way till Sunday. Need to get working on the Barracuda, it's registered for a show this Saturday.

Made me curious. About $.52 excise tax here and another 7%+ sales tax on top of that at the retail end. Many counties and cities have their own additional sales taxes. When I started makin' blacktop, our plant used diesel to fire the burner on the dryer to dry and heat the aggs before they were...

Not sure they make one for 318, but I run the rubber one piece gasket for my 360. I made little wooden half circle blocks for ends and screwed them to plywood with blue masking tape on it. Then I RTV the gasket to the pan and put weights on the bottom of the pan to compress it a bit. Then I let...

There’s been quite a bit of early a-body stuff on FB recently. Prices vary quite a bit, but I’ve seen some deals.

.