Search results for query: *

I have for sale upper control arm bushing and the wheel alignment adjusts that were for 1968 Barracuda but will fit many other year and model A-body cars. The bushings are new and the adjusters are clean with no issues that I could see. I would like to get $20.00 for everything plus the...

I have for sale a pair of front backing plates for the 10X2 ½’ brakes. These backing plates came from a 1968 Barracuda but will fit several other year and model A-Body cars. Included with these backing plates are the bolts that attaches the wheel cylinders. I would like to get $20.00 for...

I have for sale a pair of new, never used polyurethane front strut bushings for the 62-65 Dart and Valiant cars. Energy Suspension 5-7105G: Front Strut Rod Bushings 1962-65 Plymouth Valiant & 1963-65 Dodge Dart - JEGS They are black and I believe they are from Energy Suspension but not...

I have for sale a pair of excellent A-Body lower control arm pivot pins. It looks like new bushings were pressed on and then never install in the control arms. I would like to get $25.00 for both plus the shipping. Ken Edison, NJ

I have for sale a pair of front strut rods, nuts and washers for the 67-72 A-Body cars. These struts are clean and painted and are not bent. They have the fine threads on both ends and measure 21 ½” total length. I would like to get $25.00 for everything plus the shipping. Ken Edison, NJ

I have for sale a used OEM brake proportioning vale for the disk/drum brake applications so if you do the conversion, this is what’s needed. The numbers stamped on the body of the valve are 3258924 and 3423936. From what I found, it’s used on the 67-76 A-body cars, 67-72 B-body cars and the...

I have for sale a set of 10 used axle bearing retaining plate nuts that came from an 8 3/4 housing. All are the 3/8-24 fine thread design. 9 nuts are regular hex head while the 10th nut has the integral shoulder washer for locking down the axle end play locking tab. Unfortunately, I don’t have...

I have for sale a pair of NOS steering coupler shoes P/N 2800738. They are in perfect shape and have never been used. I would like to get $15.00 for both plus the shipping. Ken Edison, NJ

I have for sale an NOS master cylinder to brake pedal boot and plate from Master Power Brakes. This is a discontinued part but carries P/N H1300. This is still in the original packaging and has never been opened. It fits all A-BODY cars, 65-72 B-BODY cars, all E-BODY cars. (For use on B/E-Body...

SOLD pending receipt of payment. I have for sale a new, still in the original packaging, Mopar Performance P5249609 torsion bar lock ring and boot kit for the 1962-1976 A/B/E body cars. P5249609 - Genuine Mopar Lock Kit-TORSION Bar W/SEAL I would like to get $30.00 for the kit plus the...

I have for sale an excellent pair of used rear SBP, 10 x 1 ¾ brake drums that came from a 69 Barracuda using the 8 3/4" rear axle. These drums were the spares for the car in case they were needed. They have never been cut and just show normal wear. I measured approximately 10” in diameter with...

I have for sale a complete, used set of SBP, 10 x 1 ¾ brake drums, shoes with all the attaching hardware along with the backing plates that came from a 69 Barracuda. They are all in excellent shape with the drums never been cut. I would like to get $60.00 for the brake parts everything plus...

SOLD pending receipt of payment. I have for sale a pair of used vented Kelsey Hayes SBP front rotors (no hubs) that came from a 1969 Barracuda. They are used but in excellent shape and have never been cut. They measure 20.574 mm thick with a 20.06 mm minimum thickness. I would like to get $30...

SOLD pending receipt of payment. I have for sale a pair of NEW, never installed 10 X 1 ¾” rear brake shoes. These shoes were originally purchased through Firm Feel back in 2013 but I think they no longer supply them...

I have for sale a pair of NEW, never installed 10” brake drums for the SBP 8 ¾ axles. They use the 2 ¼” brake shoes. https://www.autozone.com/brakes-and-traction-control/brake-drum-front/p/duralast-brake-drum-8754/716241_0_0 The fit the 67-72 A-body cars. I would like to get $50.00 for the...

I have for sale a set of 10 used axle bearing retaining plate nuts. All are the 3/8-24 fine thread design. 9 nuts are regular hex head while the 10th nut has the integral shoulder washer for locking down the axle end play locking tab. Unfortunately, I don’t have that tab. I would like to get...

I have for sale an excellent pair of used 002/003 Super Stock springs, OEM front hangers, aluminum front eye bushings (both with the ½” bolt), spring perch U-bolts and nuts and the rear shackles with new OEM type rubber bushings, along with the OEM shackle attaching brackets and bolts. Mopar...

SOLD pending receipt of payment. I have for sale a single used torsion bar adjuster setup for any of the A, B, or E body cars. This particular one came from a 1972 340 Challenger. It looks to be in great shape with all the threads really nice. It’s clean and ready to install. I would like to...

I have for sale a pair of used Competition Engineering rear drag shocks that came from my 1971 Dodge Demon drag car equipped with the MP rear super stock springs. I replaced them as part of my preventative maintenance program as I do with various other components on the car. There are absolutely...

I have for sale a very little used aluminum housing master cylinder. Dorman P/N M99294. This master cylinder is in excellent shape, is clean, was bench tested and works perfectly. Dorman M99294 Dorman Brake Master Cylinders | Summit Racing It has the 1.031” bore and fits many Dodge, Plymouth...

I have for sale a pair of new front leaf spring bushings that I just removed from a pair of MP super stock springs, 002/003. The springs were never installed so the bushings just have marks on them for when I pressed them out of the front spring eye. They fit the 1962-1974 Dodge/Plymouth A, B, &...

I have for sale a pair of used Competition Engineering rear drag shocks that came from my 1971 Dodge Demon drag car equipped with the MP rear super stock springs. I replaced them as part of my preventative maintenance program as I do with various other components on the car. There are absolutely...

I have for sale a power steering pump pulley that is in excellent shape, has been cleaned and painted and has no damage that I can see. This is the design that uses the keyway which is also included. The pulley measures 5 3/8” in diameter from edge to edge and 1 7/16” deep with the center hole...

I have for sale a set of 4 used Mopar Performance rear U-bolts and nuts, P/NP4120611. They are for the rear housings that have 3” tubes: 8 ¾, 8 ¼”, Dana 60 and 9 ¼” housings. These U-bolts are in decent shape, have been cleaned and the threads on the U-bolts and nuts chased so they thread...

I have for sale some A, B, and E body, of various years, parking brake cable parts. Some clips, connectors and a hooked rod. They all appear to be in good shape and are very use-able. I would like to get $4.00 for everything plus the shipping. Ken Edison, NJ

I have for sale a complete set of 20 open end lug nuts and washers for ½” – 20 RH thread studs. They were use on Weld ProStar wheels. They have 1.375” shank length and .687” shank diameter. They are Weld P/N 601-1426. Weld Racing 601-1426: Chrome Mag Shank Lug Nuts 1/2" x 20 RH Open End - JEGS...

I have for sale a pair of excellent 002/003 MP super stock springs. These came on a 72 Duster parts car project that we bought a while ago to get the narrowed 8 ¾ rear. Mopar Performance P3412002 Mopar Performance Competition Leaf Springs | Summit Racing Mopar Performance P3412003 Mopar...

I have for sale a pair of New rubber front leaf spring eye bushings with a 1.5” inside diameter. They are the OEM rubber bushings that were pushed out of a set of new MP super stock springs. These bushings will fit any application with the 1.5” diameter front eye with a 5/8” diameter bolt. 1960...

I have for sale some A, B, and E body, of various years, parking brake cable parts. Some clips, connectors and a hooked rod. They all appear to be in good shape and are very use-able. I would like to get $6.00 for everything plus the shipping. Ken Edison, NJ

Sale pending receipt of payment. I have for sale a set of 4 straight chrome metal tire valves. These are required as per the NHRA rules for valve stems. These are still in its original unopened packaging. They are Mr. Gasket P/N 1957. According to the specs, they fit wheel holes of .453”. Mr...