Search results for query: *

copyright 1990, book is beyond my "S/S springs w/long shocks and slant six t-bars" mentality and budget. There is parts about pinion angle and leaf springs so it's not completely all 4-link and ladder bar talk. I could see it being very helpful to an "open" minded person "building" a car. My...

7 sockets, 1/8 to 1/2 Whitworth also labeled 3/16 to 9/16 British Standard, made by Koken in Japan. $20 for the set plus the ride. Payable with USPS money order please. Thanks for the ad!

one like new spray gun, #238 155000 964. It appears dad used it for something, not sure what. It is clean, trigger pulls and releases, 2 thimble knobs turn freely and nozzle collar also removeable. 1/4" pipe thread fitting for air hose, stamped on lid "Do Not Over 50 Lbs. Pressure". $20 plus...

NAPA Fleet mechanical end lift model #5-22, 3,000 lb. capacity, 9" lowest setting at lips and 34" at top of lift. raised front end of G30 small block van with it...your arm gets a good work out! Serial # is 22-426 so it may be for Hemi cars only (snicker,snicker). Pick-up only please.

got this from a buddy so long ago I'm sure we've changed area codes since then. he scavenged parts, put it together, I got it from him to put in my garage. welll, I did put it IN the garage, just never installed or wired it. so, before I break a tube, somebody come and get it and you worry about...

Speedaire compressor, 1/2 hp 80 lb max pressure. motor hums when plugged in, doesn't know rest of the song. tapped tank top, bottom and sides with ball peen hammer and didn't notice any difference. can't say the tank is rust free, but I didn't put a hole in it or hear a dull thud. IF I had room...

67" wide X 21" deep and currently 29"tall. while a little short for me, it is an invaluable working surface. also included, is a 48" wide X 96" deep "holding" area. great for "stuff" or sheets of plywood to pull out and cut to length. currently the rolling aspect is people power but with a...

used, missing wheels. looks like it had been sat on. straightened grill and housing out well enough that the blade does not hit. variable speed motor, a little too big for my garage...it would stir up so much dust I'd have to leave. pick-up only please. Thanks for the ad! Bob

homemade,2 x 6 top boards, 22" deep work surface, 25" from front to back, 35" tall work height, 6" foot wide, shelf is 1 by's. has holes drilled for vise, not included, some cupping in the top boards. pick-up only. Thanks for the ad! Bob

Ace brand,1" round dies and handle.$25 plus shipping.

Stackbin Stackbox #3, 9" wide,7-1/2" tall, 15-1/2" long to top bar and 18-3/4" long to lip of scoop. Weight is 9 pounds each,prefer pick-up. $60.

see pictures,have more if interested. Craftsman jigsaw is only inoperative tool. Craftsman grinder/sander: 1/2" electric impact; Craftsman wall mount/carry case with 3/8" drill,orbital sander and tilt jig saw with circle attachment.

as seen in pictures, I started to take apart for cleaning and to rewire. In the interim, a family friend was selling their metal lathe that was a little larger and had the milling attachment. The unit for sale belonged to a co-worker's father. He says he remembers carrying this thing out of a...

or grinder or transmission stand, limited only to your imagination. The base is 44" long, 29-1/2" wide, 38-1/2" or so tall. The pads are 1/4" and the tubing thickness of the upright is 3/16". There are holes in the upright to allow wires to pass thru in it's previous life. The upright unbolts...

bought this lathe and then a larger one became available. I believe the pictures and title answer most questions. any others just ask away. Thanks for the ad!