Search results for query: *

Does anyone have a photo of where the factory resting position is for an early A-body door handle and window crank (w/ window up)? Something like this (photo below) would be great. Thank you.

Have any of you had the little ledge that holds up a headliner listing wire/bow bend or break off? This is an early Dart HT, so I'm unsure if '67-'71 Darts have a bow in this location. I got just about done with the installation of the headliner in my '66 Dart when I noticed that one end of the...

For those of you who have installed a bow-style headliner in one of these old Mopars, how much of the bow channel on the new headliner did you trim? In other words, how much of the bow do you leave hanging out before installing?

I'm refurbishing a set of bucket seat sliders and am just wondering what this "tag" is for. Each side has one and it's hooked on the cross wire that connects the slider lever pivot arms/latches. What are these for??

Have any of you used body-colored tinted (or black) raptor liner on the trunk floor of your A-body (or maybe inner quarters in lieu of undercoating)?? I'm thinking it may be a decent alternative to traditional 2k paint and maybe more durable. Thoughts?

Can Procar seats be bolted to stock A-body seat sliders?

Does anyone happen to know the aluminum sill trim plates on a 66 Dart are anodized? Do you guys have any tips for cleaning these up and making them look good?

Where do you guys recommend buying a fabric headliner? Better yet, are there any to avoid? I'm getting ready to either install one in my 66 Dart, or have someone else do it. I haven't decided yet. Either way, I need to buy one. Where's a good place to pick one up? Thanks!

For those who have restored cracked steering wheels, what epoxy have you had luck with? The wheel I'm working on has a few pieces that have broken off that I have to glue back on. In the past, I've had problems with JB weld sticking to plastics. What do you all use??? Thanks!

I'm thinking of making (or buying) a small cupholder, to put between two bucket seats in my 68 Dart. Do you guys have any pictures of small cup holders you made, or bought for your old mopars? Is there a universal one that exists out there that fits in these A-bodies? Otherwise, show me your...

Does anyone happen to know if there is an over-the-parts-counter replacement for the metal door panel retainer clips. I only need one and would rather not have to order a whole set online. Thanks!

I popped the door panel off my 68 Dart to have my door lock cylinder re-coded. In doing so, I noticed this piece disconnected from front window channel, where it's supposed to attach. I'm assuming it's some sort of support bracket. Since I never even noticed it, I'm not convinced it's 100%...

Is it possible to tighten a loose interior rear view mirror for a 68 Dart??? I haven't taken mine off yet, but I'm wondering if they can be tightened up since everytime I take off from a stop, it moves.

Trying to remember how the front seat belts in my 68 Dart went. Do the retractable part with the male belt buckle go on the trans hump? Or do they go on the rockers? Thanks! Edit: Car has bucket seats if it's not obvious.

Is it possible to disassemble this AC/heater switch connector to replace the vacuum lines?

I've got leak around the raised circular piece of metal that attaches to the upper part of the cowl vent holes that are supposed to prevent water from leaking into the car. It's right above the vent boxes on both sides. It looks like some of the old sealer has dried up and broken off. What...

I'm looking into replacing the buckets in my 68 Dart since they are from a late model (i don't even know what) car. I'd like to use a mopar high back-style bucket. In checking prices for upholstery and seat foams, I'm sort of blown away. Does anyone sell affordable factory style upholstery...

Does anyone have a part number for those little rubber glove box bumpers? I'm wondernig if I could pick a couple up locally. Thanks!

I recently bought a new 68 dash pad from Classic Industries. Nice looking piece! I did notice however, that the pad is missing two small holes (one at either end) for screws that went through the backside of the dash on the one I took out. I'm wondering if someone had modified my old dash pad...

Does anyone sell a quality reproduction 1968 Dart upper dash pad? How about lowers? Also, are the caps any good when redo-ing dash pads? I found these online. I'm wondering if they'd be worth a shot. Has anyone dealt with Herb's Parts? Herb's Parts - Mopar Restoration and Performance I'm...

I'm in the middle of my first carpet install in my 68 Dart and have a couple questions. The carpet I bought from Trim Parts recommends using a spray adhesive to stick the carpet down. Do you guys use spray adhesive? If so, which one do you recommend? Also, does the carpet overlap the pinch...

Can you guys recommend a decently priced carpet kit that actually fits? I'm getting ready to re-carpet my 68 Dart. I haven't bought a carpet kit in a really long time. Is ACC still the 'go-to,' or are there other companies that are better? Also, Do you guys prefer the traditional 80/20...

Have any of you folks used a B&M Pro Ratchet shifter with a stock console? If so, could you post a picture or five? I'm installing a Pro Ratchet shifter in my 68 Dart and trying to decide whether I should keep the console or ditch it. Thanks!

How hard is it to replace the dash pad in a 68 Dart?