Search results for query: *

My Speedometer just broke. I checked the cable and it seems fine. I have a 67 Barracuda with the 150 mph speedo. Can these be fixed? Is it hard? Is there somebody who specializes in fixing speedos? I have a 3 3/8" Autometer speedometer in my Dart and it looks like (more or less) the same...

I'm considering installing either a Turbo action cheetah, or a PPP (http://www.precisionperformance.com/) shifter in my 67 Barracuda. It has (or will have) a 727 out of a truck. Has anybody installed either of these "mated" with the stock center console?

I am finally assembling the interior on my 67 Barracuda Fastback. Two questions: 1. On the back flat metal shelf between the back seat and the trunk, there are screw holes on the bottom front that are for securing it to the floor, and there are screw holes on the top front that I have no...

I have a 67 Barracuda Fastback with the Rallye gauges. Between the speedo and the oil/temp/etc gauges is the "perfomance" gauge. The opening is about 3" diameter. Is there an aftermarket tach that fits and looks decent for this spot?

I was wondering what is the best way to remove the lenses in a Barracuda rallye dash bezel (also the "Barracuda" emblem on the glove box trim). It looks like some kind of plastic rivets (see pics). But before I go prying, or drilling, and potentially breaking stuff, I am hoping somebody has...

My 67 Barracuda glovebox has two hinges, but only one side has a spring. Is there a source for these? Anybody have one? The pics show the spring and location. (looking from the back of the dash and out the glovebox hole)

I was going to re-upholster my seats for a 67 Barracuda today. They are the fold down type. I unhooked the old upholstery from the back top section, but it seems that there are hog-rings holding the interior (inserts) portion of the upholstery to the seat frame/springs. It would seem I have...

When I bought this 67 Barracuda, the headliner was already removed, but I have the bows. Can anybody shed some light on the order. This is what I have, from longest to shortest. The paint on the ends is spotty at best. There are five of them. all are yellow on one end (does this indicate...

I am almost finished rebuilding my heater box. I was wondering what is good to use to replace the cardboard backing and where to get it? (see pic)

I have an auto center console for my 67 Barracuda. I have everything (I think), except the rear bracket(s). Does anybody have a pic and/or dimensions of some so I could maybe make some? I'm not really sure how many brackets there are. Is there one for the front?

I was going to paint my interior floor and put some kind of sound deadener in there. A friend of mine suggested I look into the roll on bedliner stuff. Seems to make sense. It is waterproof (?) and is rubberized so it seems it would work as a sound deadener also. Has anybody used this before?

I was wondering how hard it would be to install a roll bar in a 1967 Barracuda, with a stock interior. The interior is currently gutted. I don't think the car will go into the 11's, but I would be more comfortable with a roll bar if I don't have to cut up the stock interior too much. Anybody...

I got the inside of my 67 Barracuda gutted, except the headliner channel above the doors. There is only one screw at the front end of this. So, It looks like I need to remove the chrome trim at the top of the drip rail seal at the top of the windows to get to the chrome trim, to get to hidden...

I am going to attempt to install 66 buckets in my 67 Barracuda. But I need to remove the floor pan bolts from the seat tracks so I can better check how they sit on the floor pan. After removing some of the rust, it looks like they are the square carriage type bolts and should be removable. I...