Search results for query: *

Looking for a output shaft bearing cover for a 727 transmission in a 72 Dart. This is the small rectangular piece that bolts to the bottom of the extension housing, hiding the output shaft bearing/snap ring. Let me know what you have and how much shipped to 92626 - thanks!

Hi - I'm looking for a copper horn contact ring that fits into the steering wheel/steering wheel adaptor. This is for a 72 Dodge Demon I've attached a picture for clarity. Let me know what you have and how much with shipping to Foothill Ranch, CA 92610 - thanks!

Looking for a Holley 650cfm 4bbl square bore carburetor, preferably with Vacuum secondaries & electric choke. Please provide the following info when responding: What is the list number on the carb? What is the current condition of it? How much shipped to 92618? Pictures are nice too! Thanks!

Hi guys, I'm looking for (1) front parking lamp pigtail/socket/connector for a 1972 Dodge Demon. Let me know what you have and if pictures are available. Let me know how much+shipping to Newport Beach, CA 92663, thanks.

Looking for an intake manifold (carb'd) that will fit a 5.9 magnum engine. Would prefer an edelbrock air gap intake but let me know what you've got. Thanks.

I'm looking for that little radio mount bracket for a 72 dodge demon, anyone have one lying around they dont need? zip code is 92663 thanks

Need a working cigarette lighter assembly and wiring for a 72 demon...how much plus shipping to 92663

Looking for a pair of aftermarket 5.9 magnum cylinder heads. Would prefer used, but if the price is right I'd consider unused heads. I'd also prefer they were complete with or without rockers, but would also consider bare heads. I'm located near Chicago, IL Let me know how much...

Lost the nut that secures the wiper switch to the dash on a 72 dodge demon with standard non-rallye dash. Its a 3spd wiper switch if it makes a difference. Thanks.

Seemed to have misplaced the washer knob for my 72 demon standard dash (3 speed wipers if it makes a difference). prices+shipping to 60007 and pics thanks

looking for a WORKING fuel gauge to fit inside a standard A body gauge cluster...for a 72 demon specifically.

I'm looking for the passenger side (right) parking brake lever that sits inside the rear drums and attaches to the brake shoe and emergency brake cable. I'm looking for the kind that is pinned to the brake shoe and is held on with a clip. I have 10" drums in the back, not sure if that matters...

I'm looking for a brake pressure warning switch that is found in the distribution block/combination valve for a front disc/rear drum car. heres a pic of my distribution block/safety switch (note that the switch connector is broke off)

Putting back the parking brake on my 72 Demon and I seem to have misplaced a couple parts. I'm looking for the spring that fits on the one end of the parking brake strut in the rear drum brake assembly. I have 10" brakes but I'd imagine they're probably the same throughout the different...

I'm looking for a set of wheels and tires for a 72 demon. I'm pretty open on what i'll take but i do have some preferences. They need to fit a 72 dodge demon with 4.5" bolt pattern. The Demon has a bbody rearend and 1" over stock springs. Disc brakes in front. I'd like them to be at least...

I need a oil pump driveshaft for a small block 360. Shaft only, I have a bronze gear that I need to put on it. Also need a camshaft bolt for a 360 engine, roller if it matters. Or if anybody knows the correct size that would be great. [email protected]

Looking for a bronze distributor gear for a small block. Used ok.

Looking for a set of 340/360 v8 motor mount brackets for a 67-72 A body (biscuit style)

Looking for a set of 340/360 biscuit style motor mount brackets. Let me know what you have.

I need a water temp sending unit adapter 5/8" female to 3/8" male fitting. Its for an autometer gauge, they're actually included with every gauge I just lost mine, maybe someone has one they didn't need? I also need a steering coupler retainer (metal piece that goes over to rubber seal). I...

Looking for the clamp that goes over the steering couple to hold the seal on. I think they were a part some guy made for awhile and I'm just trying to track one down.

I'm thinking about upgrading the camshaft in my 360 and wanted to see if anybody was selling a hydraulic roller camshaft for a small block. LA or Magnum engines okay. Looking for something mild, used is okay and almost preferred as long as its in good condition (on a budget). Let me know what...

I need a pair of strut rods and a passenger side LCA (will consider pairs) for a 72 Demon. Its important that these parts are in good shape (minimal rust). I would like to see pictures if possible. Other A bodies should work as well. Let me know how much with shipping to elk grove village...

Looking for: Lower Control Arm Bushing Remover/Installer Torsion Bar Remover/Installer Lower Control Arm Ball Joint Remover Will be needing these tools for a 72 Dodge Demon. I'd be willing to buy these from you if you no longer need them otherwise possible rent them off you? I'd pay...

Looking for a /6 k frame that will fit a 72 Dodge Demon. Would prefer if its local to Chicago, IL or within an hour or two's drive. Some surface rust is okay but as long as I can sandblast it and powder coat without any problems I'll take it. Let me know what you've got.

Ok I made this thread awhile but I couldn't find what I was looking for. I have 72 Demon with a GY4 (gold) interior and I need the dash piece that goes underneath the steering column. It must have the part # 2984581 on the backside. Thanks.

I'm looking to buy a gauge set. I need water temperature, oil pressure, and voltmeter gauges. I would prefer if they were autometer (not autogauge) or something of similar quality. I would prefer if they came with sending units (mechanical or electrical OK) pod or no pod. I'm looking to...

I'm looking for a lower steering column cover for a 72 dodge demon, non rallye dash (dont know if theyre different). This piece is held on by four screws underneath the steering columnI'm looking for one in the same color as mine...which is like an olive/puke green. Click the attachment for a...

I'm looking for a reservoir only for a Early Saginaw power steering pump reservoir only. I have the pump internals but I dented the reservoir pretty bad trying to get it loose to rebuild it. Any condition as long as theirs no major dents or anything. Or possibly if you have complete pump...