Search results for query: *

Looking for a driver quality shield (The valance between the two front fenders, below the bumper) for a 64, or 65 valiant/Barracuda. Part number in the 1965 parts book is 2525 867 or 2525 872. Item number 7-26-15 in the cooling section. Prefer in person pickup. Not in a huge rush. I am in Florida,

Looking for a driver quality shield (The valance between the two front fenders, below the bumper) for a 64, or 65 valiant/Barracuda. Part number in the 1965 parts book is 2525 867 or 2525 872. Item number 7-26-15 in the cooling section. Prefer in person pickup. Not in a huge rush. I am in...

Friend is looking for a driver side frame rail to replace rotted piece on 1971 Valiant. Need from torsion bar cross member forward. The closer to central Florida the better.

Looking for a flywheel for a 360 LA engine. 143 tooth 14.6 inch diameter across ring gear. Does not need a good clutch surface, but does need a good ring gear. For use on a engine run stand. Need within a reasonable driving distance of Ocala, Florida. If not for sale, would like to borrow for...

just need a regrindable core, can be a stock cam. shipping to florida.

Looking for a rebuildable core 904 trans (not sure what year, should be late '80's up.) with a single wire connection at the rear of the trans (not for the NSS and backup light) for torque converter lockup. Don't care what engine it fits. Would like as close to Ocala, Florida as possible. Would...

Any one have a set of "Engine Builder" over size valves for the slant six, that they are willing to sell? Had to "steal" the set I had in a head that needed milling and couldn't get done in my time frame. Putting those valves in a head that was already milled, and the shop can do the seats in...

looking for good used or NOS power window switch on driver door panel for 88 Diplomat. Many other year and models should fit/work. Part number on switch is 3747574 I am in florida Thanks

Looking for a tailgate in decent condition. Any leads appreciated.

Looking for an affordable set of Clifford shorty headers for the 60-66 slant six. Don't have to be perfect, as I need to modify them for the 170 engine. The closer to Florida the better. Thanks.

Looking for a set of 198 slant six connecting rods. Either reconditioned, or in condition to be redone. Had a set that the machine shop totally screwed up. Can't use the K-1 or Molner rods, as they are for floating pins, and my pistons are for press fit.

Need hood release cable, for 1988 D-150. Should be the same for 79-93 pickup and ramcharger. I'm in Florida 34488

Friend looking for the 4 bbl carb adapter that comes with the Offie 4 bbl manifold for the slant six. Just need the adapter. Offie part number is 4006-5170. Looking for new or used. Thanks.

Looking for a good deal on a center link for my 64 Valiant. Six cyl or V-8, either one is good. Would prefer to be able to pick up at one of the November Florida Mopar shows.

Looking for one good used 198 slant six connecting rod. Number on rod is 2951260

Friend looking for a complete left rear tail light assy for a 1972 Duster

Need the throttle cable/lever bracket, that bolts to the firewall for a 64-65-66 "A" body. Not the "twisty" linkage bracket. Don't need the pedal (bolts to floor), or the cable itself. Does not have to be in great shape, just barely usable. Used on slant six with air conditioning or V-8. Price...

Need the throttle cable/lever bracket, that bolts to the firewall for a 64-65-66 "A" body. Not the "twisty" linkage bracket. Don't need the pedal (bolts to floor), or the cable itself. Does not have to be in great shape, just barely usable. Used on slant six with air conditioning or V-8 Thanks.

Need the plate that bolts to the firewall, where the steering columm goes through. I need the large plate with four bolt mounting, not the smaller plate that fits around the columm. It is 65 only. The hole in the firewall had to be large, for the cable shift box to fit through. 64 had push...

Need a set of over size intake and exhaust valves for a slant six. Thought I had a set of engine builder valves, but I guess not. Trying to get my second car ready for the Clay City race.

Misplaced the shoulder bolt, that connects the brake pedal to the master cylinder push rod. 66 Valiant manual brakes. Can some one help me out?

A friend is looking for a 3x2 webber intake manifold for a slant six. If someone can help him out I'll put you in touch. Thanks.

Looking for a 170 CID slant six crank with the large converter pocket in the end of the crank. Two years, only, 1968 and 1969. Diameter of the pocket should be 1.81 inches. Diameter of the wrong (1960-1967) crank is 1.55 inches.

Looking for a 1968 or 1969 crank for a 170 slant six. Must have the large converter pocket. I'm in Silver Springs,Florida

Looking for a used 9 1/2, or 8 inch converter. Don't care if it is for the early small pilot/spline, or late large pilot/spline, or combination of either. Will be running a slant six, so if the converter is from a V-8 it would need to be about 5,000 rpm stall. That would give me somewhere...

Need two differential side gears (mesh with spider gears) for a 7 1/4 clutch type sure grip. These are different then the open rear gears. OEM part number 2404 418

Looking for the complete shift linkage, for a 66 "A" body columm shift 904 trans. Need everything that connects from the columm to the trans, including the cross shaft and brackets. Thanks. Charlie

Looking for the complete shift linkage, for a 66 "A" body columm shift 904 trans. Need everything that connects from the columm to the trans, including the cross shaft and brackets. Thanks. Charlie

Looking for front fenders for a 64 Valiant. or good lower rear section of front fenders from 64-66 to repair my fenders. Don't have much to spend, so please don't be insulted if I can't buy at your price. I'm not sure but 63 lower sections might work, also.

Looking for a new or good used ring and pinion for a 8 3/4. Tried 4.89's and they are too deep for even the 1/8 in my 66 Valiant. Big problem is I don't have much to spend right now, so I'm looking for a bargain. Also a mini spool, or a set of those "blocks" that replace the spiders. Can someone...