Search results for query: *

I'm looking for a '67 and earlier model ignition switch. I don't need the lock cylinder, but the switch itself must have the nub cast into the housing that centers and locks the switch in place. Either one of these part numbers will work - 2097628 or 2497158. Thank you!

I'm looking for a twin post side mirror (#2255521) for an early Dart. Must be in good shape with a tight ball joint and I'd need it shipped to 95691. Let me know if you've got one laying around. Thank you!

Anyone have an extra window crank/door handle screw laying around. It's off a '66 Dart, but I'm sure they're pretty universal. They're about 3/4" long and have an allen head. I seem to be missing one. Thank you!

Anyone have any extra one of these clips for the trunk torsion springs laying around? Thanks!

I'm looking for a driver's side inner tail light lens for a '66 Dart to replace my cracked one. With or without the chrome trim piece is fine as long as the lens is NOT cracked. Here's what it looks like (below) and it should have the following numbers on it: D-29379LH 2575525. The housing it...

I know it's a long shot, but I'm looking for a set of drip rail moldings for an early Dart 270 hardtop. I'm located in West Sacramento, California.

I'm looking for one of these deck lid hinge nut inserts (not sure what they're called). This is for a 66 Dart, but I'm sure a bunch of years will work. Let me know if you have an extra laying around. Thank you.

I'm contemplating installing a new headliner in my 66 Dart, but realized I'm missing one of the side clips that goes on the most rearward bow (listing wire). Does anyone have one of these laying around.

I'm looking for a big block throttle cable bracket. I don't need any kickdown linkage or anything - just a basic bracket that I can modify for what I'm working on. Anyone got one laying around? Thank you!

I'm looking for a single groove crankshaft pulley for a big block - no A/C or PS. I believe one for a SB would work as well, but I'd have to double check the measurements. Anyone have an old one laying around that they don't need?

Hey guys - I'm looking for a good used 187 or 699 oil pan. PM me if you have one you'd be willing to part with. Thank you! -Evan

I'm looking for a big block 727 inspection cover. Thank you!

Anyone have an extra backup light lensefor a 66 Dart. My dumbass broke one of mine today. Here's a photo of my other one. Preferably, I'd like to find one in around the same shape (very good). Thanks!!!

I'm looking for 3 old bumper bolts that'll match the not-so-great rear bumper on my 66 Dart. Here are the three I'm trying to match (below). I'm pretty sure they're all the same for these cars, but the threads are 3/8-16 x 3/4" long. The heads are ~.850" OD. I'd use hardware store stainless...

Does anyone have one or two of the tiny glove box door springs shown below. My car is a 68 Dart, but I'm sure other years and models will work fine. Thanks!

I'm looking for an pre-71 (small rod) front servo for a 727. Thanks!

Anyone got a low/reverse band screw for a 727 laying around? Mine's got busted threads. Thanks!

I'm looking for a 4.2 kickdown lever for my 727 build. Anyone have one that they don't need? Thanks!

I'm in need the two spring pieces used in a 66 A-body steering coupler (see pieces circled below). I could also use one of the earlier-style springs with the shorter middle hump (the left one pictured below) Please PM me if you have either one of these that you'd be willing to part with...

Does anyone have one or two of the tiny glove box door springs shown below. My car is a 68 Dart, but I'm sure other years and models will work fine. Thanks!

I need the following parts for a couple Holley carburetors I’m putting together. 1) Secondary fuel bowl for a 4150 double pumper. All threads must be intact and usable. 2) Electric choke thermostat/cover for 4150 3) Electric choke thermostat clamp for 4150 (the triangular shaped ring that...

I'm looking for a 17" or 17.5" clutch fan. Thanks.

I'm looking for a 6" or smaller single-groove water pump pulley. And a single groove crank pulley. PM me with details. Thanks!

Looking for a 360 oil pan for a truck (rear sump). PM me a price with shipping to 95691. Thanks.

Anyone have an extra oil slinger hangin around. PM me a price shipped to 95691. Thanks!

Does anyone have a used B&M 10236 flex plate they'd sell me? I need the one shown below. It's for a 360 using a neutral balance 727 converter.

Does anyone have a good A/C-heater vacuum switch connector? I only need the connector itself with about 3-4 inches of good hose on it.

I need 2 short seat belt bolts. They are 1-1/4" long with a 3/8" shoulder and 7/8" threaded length. Let me know if you have a couple you'd be willing to give me a decent deal on.

Does anyone have an old orange box (or any other ignition box) that doesn't work? I need one to gut out and hide an HEI module inside of. PM me with a price with shipping to 95691. Thanks, Evan

I need a single groove crankshaft pulley. Anyone have one?