Search results for query: *

I need front seats, 2-dr door panels, backseat, for Wagon or Barracuda, and seatbelts. Black or dark color preferred. Maybe willing to buy Sebring convertible, bucket seats.

It might be a bit premature, but I am interested in finding a 1960 to 1962 valiant or lancer Two door preferably, but I consider a four-door or even a station wagon. I don’t want one that’s restored, but I want one that has been neglected and left to rust. A drag car or drag car project would be...

I’m looking for the divider board for 1965 Barracuda that goes between the cargo area and the truck that has the hinge at the bottom, metal framing around the perimeter, and two latches at the top not to mention some rubber circular pieces that mount to the truck side of it. I know that someone...

Looking for a 65 Valiant instrument cluster and other dash parts to get my car running. Must be working. Looks not so important. Reasonably priced.

I need a windshield seal for a 1966 Dodge Dart and or a 1965 Plymouth Valiant. I don't care if it's used as long as it's a good usable seal that is reasonably priced. Thank you. Partsgeek.com has one for $39. Is it any good?

I am looking for a a decent, driver quality front valence for either a 64 or a 65 Valiant. it doesn't need to be so conditional perfect as this is just a driver. If you have one that you took off of your car to put a better one on, then let me know as I might be interested in yours even know it...

Does anybody have some reasonably priced, solid fenders for a 65 Valiant or barracuda that I could get a hold of, or should I keep working with the junk fenders that I have that are rusted through in so many places? I would prefer to find some in Florida because then I could pick them up and...

I need just the sheet metal headlight buckets that are spot welded to the front of the fender in ten to twelve places out of some 64 or 65 Valiant fenders to replace the Rusted through ones that I have. I junked some about 5 months ago and now I'm kicking myself. I do not need the headlight...

I am working on a budget and I'm trying to keep the car as cheap as possible and so I am not looking to order new Springs at this time. I am looking for a good set of leaf springs for my 66 DART station wagon project. If somebody has a new or used set of 1 inch over Springs somewhere in Central...

I'm looking for a small 4-barrel carburetor to put on my 318 and I would prefer to have another 4 Barrel carburetor like the one that originally came on the early 273 automatic cars. Let me know what you have and how much you want for it please.

Early A body drivers (left) side door from a two door sedan (post) car (has frame around window). I would purchase a parts car is close enough to central Florida.

I need a driveshaft for a 66 Valiant (66 Dart stationwagon) and a good, working slant 6 auto radiator for the same. The closer to central Florida, the better. Oh, I also need a back seat for the station wagon.

65 Valiant wagon wanted. Title says it. Tell me the condition and price. Running or not. May consider other years. East coast preferably, but will consider others. A fixer-upper may be best.

I am looking for an early A body drivers side two for sedan ( frame around the window) door plus the front of the quarter panel with post and window. Reasonably prices and close to central Florida would be nice. This is for a driver car. Rust is acceptable. 63Valiant

Title says it all. I am looking for a driver's side door and front of quarter panel for a 65 Valiant. Prefer something on the east coast near eastern PA or Florida. Inbetween is fine, too. I may be interested in buying a whole car, running or not.

I need to get a set of small block valve covers that some one may have already off the car. Orange preferred for a 65 273, but any color will do for now. I am in eastern PA near Allentown. They can be dented as they won't be permanent. I just don't have any on an engine that I want to preserve...

I would like to buy a 65 Valiant Signet grille. Must be for a Signet with the round circle around the V. Also, would like the 65 Valiant signet fender emblems. Would also like for a 65 Valiant: front fender lower rear doglegs (sheet metal). front bumper. convertable top in black. rear...

I am looking for a 65 Valiant signet emblem that goes on the left front fender. Driver quality is fine. Let me know what you have.

I am looking for a solid 65 isn Barracuda body to put a drive train into. I have a 64 Dart Hardtop that will be loosing it's drive train and then I will sell it. Must be in North Eastern US. Would consider a solid California car if the price was right as it needs to be shipped. Let me know what...

I have a 68 Dart 318 that has 25 degrees of slop in the distributor and I need a new one. I don't think it is original to the car since it now has electronic ignition on it. Are they expensive to buy new and can you get a good, new one? What about getting it rebuilt? Perhaps someone has one...

I am not sure what year or style of car it came off of, but I am looking for one of these in driver shape. I only have three right now. What is is originally from? I hope the pic loads. Thanks all. Title should say, "I want a 60's wheel cover in photo". Sorry, I was too tired when I posted...

Looking for a bumper for the newly acquired 65 Valiant. I have a 63 bumper, but it is different. Also, does anyone have a 64-65 two door parts car with good doors and 1/4 panel fronts with post and rear windows?

I am looking for a 65 Barracuda, possibly a nice 66, with auto on the floor and engine size doesn't matter. Also, I am interested in a project car 63-66 Valiant or Dart wagon. Again, engine doesn't matter. Frame must be good and body should be usable. I would fix up a rusted out car if the...

I am looking for a 2 bbl carburator for a 64 Barracuda with 273 that works well. i rebuilt the one I had, but it was missing parts before I got to it and I couldn't make it run well. Also, I need a good 500cfm to 625 cfm 4 bbl carb for a 318. I am in eastern PA. Priced reasonably please. Thank...

I am looking for a set of 2 large bolt pattern aluminum slots in 14 x 6 inches. I was looking for these late last year and found some, but moved and lost computer for a while and never completed the transaction. My appologies to the people I was in contact with. I had unilug wheels on the...

I want to buy two 14x6 or 14x7 Aluminum slotted wheels commonly called mag wheels. I only want the 5x4.5 pattern and not unilug wheels as I am pyutting them on the front. I just pulled off a unilug wheel that had 5 cracks in the center, so I don't want a unilug wheel. PM me if you have...

I need the shifter levers from a 66 (and up, I guess) Column shift auto trans (904) that go from the column to the trans. I converted a valiant to automatic and I don't have the shift levers. May be the same as a slant 6, but this is for a v-8 engine.

I am looking for a nice driver or better quality 65 Barracuda, not a 64 or a 66, that is at least in drivable shape and not rusted away. I'd prefer a V-8 but would appreciate a slant 6 just the same. Tasteful modifications are fine. Must be in or near Florida. Let me know what you have and...

Looking to see if anyone has a white headliner they never installed or a Gold Carpet for a 64 Dodge Dart. Also need bucket bases, not the tracks, just the four bases with the threaded parts that go through the floor.

I need the early a-body bracket that holds the seat slider to the floor. I have the sliders. I just need the bracket. Thanks.