Search results for query: *

Regarding the kickdown and low/reverse band adjustments...can you gauge how much life/material is left in a band by the amount of threads left on the adjuster screws (after performing proper adjustments)? What's considered good / what's considered "worn"? I'm not really having any issues, but...

Hey Everyone, I pulled apart the valve body from my 727 to install the TF2 Shift Kit and I came across a couple of concerns while cleaning it. Since I'm not too familiar with VB's I'm hoping some of you can give some advice. I'm also planning on having a trans shop put it through their parts...

Hey guys, Have a 727 with a leaky low/reverse band pin o-ring and have some questions on replacing it in car. I think I have the process understood from searching the site (Remove trans mount/tailshaft. remove pan, remove valve body, loosen low/reverse band, and push pin out far enough to...

I’ve noticed some fluid build up around the hex nut that secures the speedo cable to the speedo gear adaptor housing. Thinking the inner seal on the adaptor housing was the culprit I ended replaced both the inner seal and o-ring. Cleaned everything off, went for a drive and noticed fluid in...

Pulled apart my 8 3/4 the other day and I noticed that there were 2 of the steel gaskets that go between the housing and the backing plates. Isn't there only supposed to be one? Also, where can I get the foam axle gaskets?

I've been told when swapping gears its a good idea to replace the pinion bearing since it has to be pressed off. I'm just a little confused if I only need to replace the inner or outer or both? I believe I have a 10 spline pinion shaft as the pinion nut was 1 1/8" as mentioned in another...

Is there any difference between big block and small block 727 converters?

I bought a 727 transmission from a guy and it came with an unknown converter. I'm trying to find out who makes its and possible a stall speed. The transmission is supposedly built with a shift kit (somebody drew a skull and crossbones on it so it must be lol). It looks pretty identical to the...