Search results for query: *

904, manual valve body, "drag free". Behind a mild stroker. (Iron heads, flat tappet cam) built by a reputable shop. Its always had a flare on the 2-3 shift when shifted at wide open throttle. A search of this forum says incorrect kickdown linkage adjustment can be the culprit. However being...

At what power level is a 904 no longer big enough? Here's the story. a couple of years Back My dad bought a drag free 904 w/full manual valve body from a reputable shop. The car is an Aussie Valiant hardtop. (Very similar to a 68 Dart) Runs a 340/418 stroker. In the time it's been in there...

My apologies if this has been thrashed out before, But we have a 904, bought from a reputable shop. It's a full manual valve body "drag free" (What ever drag free means?) 904. Supposed to be a pretty good unit. According to the shop who supplied it. However when I'm racing, and really have the...

Are the valve bodies on SB 904's all interchangeable? or did the change things around on the newer stuff?

I came accross this http://www.trademe.co.nz/motors/car-parts-accessories/chrysler/gear-boxes/auction-423477969.htm while surfing tonight. I did a google, but I've not been able to find what's included. I'm guessing it's seals and gaskest? I scored a 904 in bits for $20 (Was alegedly a good...

I'm building a car on a very tight budget. The cam I'm going to use will require a hi-stall converter. Since my budget is tight, I'll either be using a cheap aftermarket one, or getting a local shop to make my existing converter into a Hi-stall unit. The engine is most likely going to get a 150...

I'm a bit of a newbie at the whole Hi stall thing. I've started buying up parts for a low buck build I have planned, and as much as I cant really afford one, I'm gonna have to get a hi stall for it. I've used one of my dads cars on the strip which has a nasty engine with a stock converter, and...

Hey guys, I have a 904 that had been used behind an aussie hemi 6. It crapped out, and the guy (a good mate of mine) had it rebuilt. The shop askd him where it had come from 'cos it had extra friction plates in it. (It's history was unknown as it came from parts unknown. He drove it for a few...