Search results for query: *

I picked up a rebuilt 904 and installed a Cheetah forward manual valve body myself after I picked it up. Thought it was a pretty straight forward install. Well I got everything together and it slips in the forward gears but reverse works good. Like I mentioned,when I put it in any of the...

So I picked up a rebuilt 904 and installed a forward manual valve body myself after I bought it. Seemed easy enough to install the valve body so I decided to do it myself. On my first trip out it slips in the forward gears and doesn't shift firmly into any of the gears either. It does...

In my 74 Scamp I swapped out the /6 and 7 1/4 for a 360 and 8 3/4. Any idea and what my drive shaft length should be now from cap to cap? Thank you.

What size U bolts do I need for an A body 8 3/4? Thank you.

It's been years since I've put a 8 3/4 togther. I cannot remember does the spring side of the inner seal face in or out? Thznks.

Looking at a used 9.5 Dynamic convertor for my 360/904. Anyone use Dynamic? Thanks.

I'm going to be running a forward manual valve body. Can you guys recommend me a rachet shifter? Thanks!:burnout:

I'm installing a Manual Valve body in my 904 and it's telling me to remove the governor valves if transmission is out of the car. I have no idea where these are or what they look like. Any pics or can someone tell me where they are? Thanks.

I bought a Hurst Quarter Stick and the guys I bought it from told me he"thinks" its for a reverse manual vb. Is there a way to tell for sure without installing and hooking up the shifter? Thanks.

I'm thinking of installing a Tranzact rmvb in my rebuilt 904. What other parts should I look into installing with the valve body? Thanks.

In what order does the foam gasket/tin gasket and backing plate go on when installing axles in a 8 3/4? Thanks,its been a while since I've done this.

I'm looking for a shop book on rebuilding a HP 904. Does one exsist? Thanks!

What's involved in dropping a RMVB into a 904? Can this be done DYI or leave it to the professionals? Thanks?

I just bought a Quater Stcik that came with a cover on it and I cannot get the cover off. It is loose but seems the reverse knob is in the way of me removing the cover? It can't be this difficult to remove this thing can it? I must be missing something?:banghead:

Will the 904 I have behind my /6 work behind a 360? Thanks!

I have a 727 with the long tail shaft. Will this fit in my 74 Scamp or will I need the short shaft trans? Thanks.

I picked up a 360 with a 727 out of a motorhome. The 727 has the long tailshaft. Will this be a problem dropping this into my 74 Scamp or should I look for a short tailshaft? Thanks!

Does anyone have the part numbers for the inner axle seals for a 8 3/4? Thanks.

I bought a 8 3/4 bare housing and my plan is to drop in the chunk and new axles with Green bearings. Now with this plan do I need inner and outer seals? Thanks!

I'm wanting to swap a 8 3/4 into my 74 Scamp. My question is,are there years of the 8 3/4 that will bolt right in or do most need to have fab work done to bolt in? Thanks.

How much power can a well built 8 1/4 rear handle? Thanks.