Search results for query: *

Do the green bearings work in the 10" X 1.75" Brake drum application with the small bolt pattern? I apologize if this is a silly question. I am putting together a SBP 8.75" axle and trying to get all my parts sorted out. All of my other stuff still has the OE Tapered roller adjustable bearings...

Hello All, Is there a vendor That Sells Solid Transmission mounts for a '68 A Body? I have a motor plate and would like to get the trans mount solid as well. Currently I have an imperial Services one that is getting pretty beat up. If not, I suspect that I will have to break out the welder...

Hello, I am looking to find Just the Front drum Bushing part # for the 904 Transmission. It seems that ATP has a complete bushing set, I Just want the one for the Front Drum. Any help is appreciated. Greg

Hello All, I had a pump drive Lug failure on my 904. it took out one of the 3 ball bearings on the back of the pump support. Question is would the same part from a Lockup 904 interchange with a Non Lockup Back Half of the front pump support (stator) The part # is the same on both that I Have...

Hello all, I have acquired a (I believe a 1968) 273/ 904 combo. A few questions... are the torque converters for the 273/904 the same externally as a 318/ 340? It seemed to be the same size as a slant 6 torque converter that I compared it to. I have some experience with the '68 273 but it...

Hello, I am trying to find the spec on the 8.75 Checking Distance for setting the Pinion Depth. Setting up a new case with swap meet sourced gears and case. Gears have no stamping of + or - and no checking dimension stamped on gear either. Thanks for your help. I know How to set with pattern...

Hi Guys, I am trying to sort out a problem I am having with a fresh build. I have a TF3 valvebody in a 904 - Have used it for years with no problems. Kickdown Wired Back as per Transgo and Mr. Shifts' instructions. I recently Rebuilt the trans with all aluminum Drums and Full Roller...

Hello Guys, I have Recently Replaced my stock Park gear and Gov. Assembly with the Aluminum Park gear and collar / Spacer From A&A Trans. in my 904. When I received the parts the Gov. Spacer had written on it from A&A "May need sanded" So i did sand it to clearance the Retaining...

Hello Folks, I am Running a Transgo TF-3 Valve Body - I was curios to see if it has a Low band apply? I am thinking not, but I just wanted to check for sure. Thanks, Greg

Hello Folks, I have a 904 with A transgo TF-3 Full Manual Valve Body in it. I recently Snapped a Driveshaft and as a result, Cracked my Bellhousing. Because of all this I had to get a new 904 case.. I am in the process of swapping in the Internals from the busted case to the New case...