Search results for query: *

Ok so my set up is 73 duster 4 speed with 83/4 diff just swap gears and ended up using a 489 case I did have a 741 case now it’s all back in the car I know the ujoints/Yoke is different the 489 uses a larger ujoint but what ujoint does it use

Ok I was wanting to know if anyone know about the NP208 transfer case. The t case in my truck 84 w150 work fine other then it will not go into 4lo. I have read how to adjust the linkage but also read that in these t cases if 4 lo is not used often it can rust and not allow it to work. When I...

Ok so the Dana 60 in my truck is loosing the lock it spins both rear tires for a few seconds in a mud hole then only one. Also how make a good spool for a Dana 44 for the front axle. If I change fluid and put additive in it will if help the rear end of do the clutch's need rebuilt.

Got my hands on a 9 1/4 out of a 88 van 8 lug 3.55 gear open. what would this be worth on the market.

I have a 8 3/4 rear end with a open 3.55 can I swap a 489 case suregrip over with my ring/pinion

Has anyone had he axles out of a 8 3/4 rear redrilled form 5x4 to 5x4.5

What else will I have to buy or do to put this in my 8 3/4 rear 3.55 open http://www.summitracing.com/parts/pwt-1240-lr/overview/ or http://www.summitracing.com/parts/aub-542051/overview/

Ok so I am running a 360 4 speed duster 3.55 years right now but I would like to go to a procharged 360 5 speed manual with 3.93 years. what are my options as far as a 5 speed swap Thinking about a t-56 magnum of a trans out of a ram of Dakota.

I have a 8 3/4 open 3:55 gear rear If I put this in it what else would I have to do to make it work. http://www.summitracing.com/parts/aub-542051/overview/nd

Ok so I got the motor in and rear and all the goods now's time to start collecting parts and knowledge.I have decided to put off the stroker build for now. Setup now (Read signature) I want to swap to a 4 speed in my 1973 duster:burnout: I know I will need Trans Clutch setup Pedals My...

How to I adj the detent on a 904 360 4 barral

Ok so I am reassembling my 8 3/4 rear do I need to repack and regrease the bearings or does fuild lube them when it is running.

Ok so I picked up a 904 for a small block.Will a torque converter off a 318 work on a 360.I know I need a fly will a flywheel off a dodge ram or something with a 360 auto work.

I have a 8 3/4 rear end out of an A100.I needs to be narrowed and I found a place to do it.I was going to get new axles from moser with the green bearing.What drum brakes can I run on it and when I get the money what disc brakes can I run on it.Also its a 3.55 gear non-suregrip can I make it a...

Ok so I found a place to narrow my 8 3/4 rear for 200 dollars. I need to know all the measurements to tell them what to shorten it. The said it would be around the same price for new axles then to respline the old ones. I found these axles are they any good...

I saw a pic of a 8 3/4 rear end with a mopar M on it but can find it anymore can you guys point me were it is. Al what custom paint jobs how you done on you 8 3/4 rear ends and 8 1/4s I like the bare metal look but cant find the paint.

What are the different 3 speed mauals did dodge made and how can you teel them apart. There is a 3 speed manual in a 68 a100 van.

What all would I have to do to put a 5 speed out of a dakota into a 73 duster.

Ok so I have a 904 in my /6 duster, I have a transmission pan leak so I got a new felpro gasket and put on it leaked still. So I put another felpro gasket on still leaking. So I replaced the gasket again. So I thought it might be the pan so I bought a new MP Pan and it came with a gasket...

OK so I got a new deep tranny pan and it came with a filter extension.And not instructions so how do I do it.It is a 73 duster /6 with a904. http://www.jegs.com/i/Mopar-Performance/312/P4007886AB/10002/-1

Were can I buy a tranny pan for a 73 duster /6 with a a-904 tranny.I called advance and auto zone and o'reilly and they can not get any or even order one.

Ok so I have replaced the tranny pan gasket on my 904 twice and it still leaks any tips.

http://www.mymopar.com/axledims.htm

Anyone used this shifter http://store.prestoliteperformance.com/mr-gasket/shifters/3-4-spd-automatic-floor-shifter.html

I guess this is were to put this I was checking summit for a auto shifter for my 73 duster with a /6 and 3 speed tranny whats a good shifter know to hard on the wallet also I have a bench seats so I need one that will work with this seat