Search results for query: *

When I install the converter and trans to the motor how much should I pull the converter back out of the trans towards the motor. Thanks Mike

I have a 3500 stall and it has some weight's tacked on it , now what I need to no is if this conv. is for a cast crank motor and if it is can I remove the weight's for my motor it has a steel crank. Thanks for you help

Here is the dana that will be replacing the 8.75 , we shortened the housing to fit the strange 35 spline axles that came out of the 8.75 and used Caltrac spring perches here are some pix of the housing / spool / 3.54 gears / strange alum. main caps , the axles are going to be drilled for the...

My endplay is .090 and I set it at .065 do you think this is good , I was told by one person to set it at .020 to .025 and another person told me that .040 to .075 is good so what I would like to know is what setting are you guy's using. Mike

OK so have gathered all the parts to upgrade my 727 , here's a list of the upgraded parts I used to make this bullet proof hopefully . - TCS 727 Sportsman Support Kit >> http://www.tcsproducts.com/products/product/556/ - A&A 727 6-Bolt Ultimate Sprag (1966-1989) >>...

I bought this dana from a mud bogger and it did look different than the 1s I have seen it has HD inside the case and extra ribbing on it one person told me that its a Super dana 60 ?? . Here's some pix Thanks

I need a recipe on what part's I will need for a 1000hp 727 514ci with a PT-106mm turbo , these are the part's I already have . - Steel billet drum loaded with the bigger piston - The Ultra Sprag from SMR - JW trans brake - PTC 4000 stall - SMR Super 2 1/4'' solid super band - SMR Super...

What 727 transmission is the better one to build or are there no differences between the two . I have 2 early model's and another in storage that I'm not sure what it is I will go and check on it tomorrow to see if it's early or late

Just wanted to see what the stock unit will hold Maybe you can post the weight of your car / HP and CI Mike

I'm building a 727 and need to buy a aftermarket race sprag and would like to know what you guy's are using my car is 99% street use with a 514ci blow thru setup PT-106MM turbo in a 67 dart. Let me know where to buy one or if someone on here has on that they bought and never used that you...

Would like to know exactly what brand and if it's old school or a newer one that is good to use. Here's some pix , Thanks Mike .

My 727 last year had a cheetah rev. man. valve body and race clutch's in a all steel 67 dart with a 440 N/A motor it ran 10.90 know I'm putting a new motor in it's a 514ci with a PT-106 turbo and I am putting a turbo action cheetah trans brake in my 727 and I was told for the trans to hold up I...