Search results for query: *

located S E Tx just N of Hoston

My thread got deleted by a mod, before I wrote down the info... as I mentioned I needed a part. Someone gave links to suppliers of b & t parts. I already know of Bernbaum. Please give the info again and I will write it DOWN quickly!! Thanks!!

Yes I know they make an adoptor, but I'm cheap and hotrodder at heart. I have a couple of slide in boxes and no bolt ons. Can is just measure and grind the handle down to slide in and drill a couple of holes to bolt in there???? It is a long handle for a 64 B body.

I will ask this here because you know why.... it is better than FBBO. I have a A833 66 up 4 speed that takes the 4.8 bell register. I have no bell right now. We know those bells are crazy high. Going in a 64 Savoy. If I had the earlier bell with the 4.3 register, can I have it milled for...

Friends 904 trans behind his slant. He wants to try to repair. Whats is the issue(s)????? Can he do it and he is not a mechanic!!

I have 2 three trans out of 62 slant cars, one A body and other B body, they have the cover on the topside. They have no mount for a floor shift. I am wondering if they are worth keeping for any parts. I have a three speed side cover trans that will go in the 62 slant Lancer with floor...

I admit I am no auto trans mechanic, barely any kind of mechanic!! My new toy is leaking bad around the shifter shaft. The FSM is vague. Can I remove the old seal around this shaft and replace with the O Relly seal??? I have the floor already cut out replacing that, so I can easily get to...

I have never considered an type of stop leak product for an auto, ( front seal leaky) but not on my financial plate to have it pulled nor this 70 yr old to pull it either on the dirt. Is there a good product that can remedy this leak and not do any damage to the trans?? 95000 mi 904...

I am piecing together a 1978 318, steel crank motor. I have a 833 A body 4 speed attached to an aluminum mopar SB bell. I have looked over wayne brewer's info. I guess I need a 10.5 inch flywheel, 130 tooth, 2.16 register. Should I not be able to find an OEM flywheel at parts store??. Wayne...

OK so a new one is $50, BUT...... any way to "bench" test the sucker!!??????

can anyone tell me if the flywheels are the same for my 62 lancer 170 slant three speed AND those for the A833 OD ???

I am putting a 64 904 to a 70 318, doesn't a member here supply that bushing for the crank????? or did I dream it??? ha

since both are externally balanced will their torque convertors interchange????? i'm putting together a stock 400 , will have plain ole B B 727. ????

have searched the computer, BUT do any of the 3-4 line bending co. offer slant trans. coolers lines??????

I have tried couple of times to adj the cable by FSM. 63 dart, pushbutton, but the trans is out of 64 or 5. I have reverse in all gears, that is, reverse, neutral, all drives. all I know is the trans was used, and "supposed" to be good! LOL...

I have a 65 manual but nothing with pushbutton info. here's where I'm at. after soaking the gear shift cable I finally got it to slide out of trans so it can be adjusted. I have pulled the pushbutton mechanism out where I can see it. all the plastic...

having TROUBLE FINDING ( ANYWHERE CLOSE!), a cable operated short shaft SB A body 904....... would will a lomg tailshaft 727 fit in the tunnel?? I am sure the trans crossmember mount will not be right for one thing.... its a pushbutton car . I have...

I know why Ma Mopar replaced the cable operated trannys. if not all the trans mechanics would have all gone to Hell from cussing the thing!?? yes, I do have a 65 FSM. piecing this cuda back together... I got the 65 273 cuda running (...

I need a pushbutton SB tranny for the ongoing project. (64 dart s b) local friend found me a guy with a 65 pushbutton SB 904,he tells me it has a slip yoke tailshaft.!?? I havn't seen it nor has he. my questions are: can a slip yoke tailshaft be...

I order trans cooler line for 65 dart. (Original rad). put one on, have to tweak it some. the other line has several bends that are 180 off. I call them... they want to pick up both lines. I ask why not just send me the line I need??? they...

the cable shift 904 has leak at the housing for the park cable, what flavor sealer can I use, no one will offer that individual gasket so I will have to use some type of sealer. thanks..

here's the question. I have 63 dart slan, the trans is a 64 904, it has a slant rad out of 72 slant duster. this is a good rad. I picked up from f riend. I have been piecing his car together. I have a 72 slant duster and it looks like the trans...

I have 4-5 early a cars i'm piecing back together. in question is 65 273 cuda. I have a drive shaft that is shorter than the ones for the darts of course. I got the boot part way out and got a bunch of dirt and rust to fall out and it actually...

I have several early A cars I want to use the old trunnion shaft. 1 is froze solid. I've asked plenty of advise on how to free stuck engines. advise includes, coca cola, skunk pee ( its hard to get), etc. I was thinking of soaking in...

installing 904 to the slant. I 'm putting the convertor into tranny, spin it with pressure applied to convertor, it goes in all the way to seat. if I remember right the convertor should stay all th e way in, right, not slide out when I tilt...

did the 273 cars that came with 7 1/4 rears have any with 10 in drums????

I know some people will swear by the 7 1 /4, maybe all the ones I've had were already woreout when I got them!? just wonder if anyone can give some info why it is weak? I got a couple in early A slant cars i'm working on. I 've had many B bodies and few...

I have a 63 and 65 dart slant cars, and a 273 65 cuda ( all auto). all have the 7 1/4. I want to at least change the 65 cuda to an 8 3/4. I have access to 65 b body 8 3/4, I will just fun drive, no racing...never had muck...

i'm aware of the "usuall" method to rid of the trunnion and use the 4x4 type setup. seems like years ago ( prpbably in MA?) I saw where you can cut off the end of tranny putput shaft and weld to plate to bolt to end of...

stabbed a slant back in the dart along with a LONG tailshaft cable shift 904. must of come out of A100? for what I can tell. long story short, It would work but the tranny mount bracket will be right where the speedo cable hole is. it...