Search results for query: *

Last fall I noticed some water in the taillight of my 67 Dart. I pulled it apart and found where the water leaked past the gasket. I put a new gasket set in the taillights a few years ago. What is best to secure the gaskets to the housing? The tabs in the lens(where it screws to the...

Just out of curiosity, I wondered if there were rare multi carb intakes for Chrysler engines, primarily small blocks. I have seen the 2 four barrels and 3 two barrels, but wondered bout the multiple (6-10) single barrel intakes or any other off or rare intakes.

Ran over a deer with my dart this morning, it was already dead laying in the road. Doing around 70mph. Didn't see any body damage on dart, some flesh and blood on frame rail. What should I check underneath? Seemed to drive fine, but plan on having alignment checked. Thanks Aaron

I am trying to figure out a temporary passenger side mirror for my 67 Dart. I would like to tow my teardrop camper a few times. I have a 70s style temporary fender mount tow mirror, but the arms hit the ridge of the fender. I have thought of rigging a backup camera but am not sure if how long...

I am doing a few mods on my 67 Dart. I want to do sort of campy mods that might have been done back in the day, but want to keep it easily reversible back to stock. Thinking of doing a sifter knob/handle on the stock floor shifter, possibly utilizing a beer tap handle. Anybody done a custom...

First I will explain what I want to do, so maybe it will make more sense. I want to run a set of cal custom valve covers on my 273, but I don't want to pop the knockouts out of the valve covers instead I want to use the twist on oil fill openings for the oil fill and pcv, using the 273 pcv cap...

The Car Craft project car Dart Swinger will be on an auction this summer. Sullivan AuctioneersUpcoming Events » » HUGE COLLECTOR CAR & ANTIQUE TRACTOR COLLECTION

I have an 8 track player (sorry not for sale)that I would like to get restored, and have been doing some research and have read that new in box is not always a good deal as the factory lubricant has likely gelled up and that the belt is more than likely shot.

What does the date on the certicard indicate? Is it the date the buyer took delvery of the car? Thanks Aaron

I accidentally let my collector insurance lapse this winter, now I am trying to get new collector insurance and am wondering what value I should put on it. It is a 67 Dart GT convertible, rebuilt 273 2 barrel, automatic, bucket seat with console, no rust through, some paint flaws, scratchs on...

Thinking of adding some bling to the 273. Have a set of Cal Custom valve covers. Is there a way to add pcv to one of the oil cap holes, I don't really want to pop one of the cal custum plugs out. Thinking of having some paint work or powder coat work done, and woud like some pics to give me...

I am trying to determine if I have the correct jack for my 67 Dart. I know the removable hook (the part that actually contacts the bumper) is stamped 65 Chevy II, Chevelle, Malibu. I'm not sure if the rest of the jack is also Gm or not. Anybody have any pictures of what a correct jack would...

Coming back from a cruise this weekend with my 67 Dart, 273, automatic, pulled off the interstate and stopped and heard a noise that at first sounded like something hitting the fan, shifted through the gears after about 10 seconds the noise went away. My first though was of the repro fan...

Does anyone know where I can get 15" wiper blade refills. I don't want to replace the whole assembly, because I have what I assume is the factory arms(they have a dull silver airfoil on them). The local auto parts had blades that fit several sizes then you broke off at the length you needed...

Got a hood insulation pad from Vans's. Its not the molded one, my question is which way does it go, insulation towards hood or on engine side? Thanks Aaron

There are abuot 6 a bodies on an auction coming up in a couple weeks. Debating on going and checking out the parts cars for potential big bolt pattern swap parts. http://brockauction.com/upcoming.htm It's the Saturday, March 29th auction. Here is a list of the cars...

I found these on Craigslist locally and thought I would throw them up here, they look pretty rough. http://siouxfalls.craigslist.org/cto/4315720956.html Not mine or I am not associated with them. Aaron

Sorry if this thread has already been done. Are there any songs about a-bodies? I know of one it is "Bite, Bite Barracuda" can't remember who it is by, looked on you tube and couldn't find it. Any others?

Ford has had Bill Blass Lincolns, Eddie Bauer Explorers, there was a Levi's Gremlins. If Chrysler had done designer a-bodies, what would they have been?

Been asked what the "GT" on my 67 Dart GT stands for, I am pretty sure it stands for Grand Touring correct?

Back in the early 90's there was a car club, D.A.R.T.S.(which was an acronym for something, but I don't remember what), that was exclusively for Dodge Darts and Dart enthusiasts. It was based on the east coast somewhere and would have a yearly show and sent out a quarterly newsletter. Just...

The folks had a 68 Coronet 440, 2 door hardtop with a 318 2 barrel automatic back in the early to mid 70's. Dad was telling me a story the other day that it had a special (experimental?)carb on it and that there was under 1,000 of these carbs put on cars and that the intake would only accept...

I have a tach dwell meter(don't remember brand)has 2 wires from it, one red one black. How do o hook it up to use it as a tach for cam break-in? thanks Aaron

I am looking for a body bumper kit for a 67 Dart and wondering if anyone has anyplace they recommend. I would like a complete kit to cover everything. Definitely need the hood bumpers, and need the little bumper for the console lid. Form what I have looked some list 68-69 others include 67...

Would like to thank everyone here. Good info and very helpful. Not done on the Dart yet, but did get the engine in. Used the method recommended here and it went smooth, never have I had an install go so smooth! I was able to install the engine in about a half hour all by myself. Thanks...

Does the battery tray sit kind of crooked front to back. I have a AMD repop, and the body shop did a craptastic job on patching some rust in that area. I did have to do some messaging to the fenderwell front corner of the tray to get it to fit enough to get the bolt that attachs the battery...

Have the 273 bolted to k-member and transmission, ready to roll it under the Dart. Have the new fuel line installed, and working on brake lines, but am kind of curious on what order to follow after that. Do I want the master cylinder in before the enigne or does it just get in the way, the...

I drug the Dart home today, and found these bushing things laying in the drivers side floor, don't remember removing them, one of them is broke so I would like to know what they are. There does appear to be part numbers but not only am I forgetfull but my eyesight isn't what it used to be...

Got the 273 all together, primed, and the distributor set(I think, got recheck it). I had taken the distributor cap clips off, to paint the distributor(I know it is highly debated if the distributors were painted), the clips were perfect, no overspray and still had the original black finish. I...

Looking through the lost/found thread got me wondering if my brothers 340 sitting in my garage is one that somebody is looking for. I haven't really dealt with the later stuff that has a matching number for car and engine, so where do I find these numbers on the engine. Brother has given me...