Search results for query: *

Anyone have a link to a slow motion video of a damper in action? Ie how much does the ring move or is it more of a vibration damper as described? I'm curious as my slant 6 outer ring is being used as a 36-1 timing ring and I don't know if it's rigid enough for ignition timing. I'm going to...

Chevy has the ability to watch the lights on the corners of their cars to determine what TPMS is tripping. Does Dodge have that logic? My 2012 caravan TPMS is flashing (malfunction detected) and I'm sure it's the batteries as the sensors are original at 10 Years old. Can you replace the...

I am blind troubleshooting this Pentastar motor without a live data graphing scantool. I understand the plug in heads that communicate with your phone are pretty darn good and cheap as they dont have to have the supporting display hardware built in. Soo....Im in the market for a BT scantool that...

2012 Mommyvan: WTF, this thing is UNDER the lower intake manifold? Its on the oil cooler block that sits in the "lifter valley" between the cylinder heads. The sender is actually accessible with a long extension and a 1 1/4 deep 1/2 drive socket or a sensor socket. My GM 1 1/4 deep socket I got...

GT40 / Pantera "Bundle of Snakes" Exhaust - auto parts - by owner -... Thats >$500 a friggin tube.

Not real interesting but I had a 57 Ford and hated the ugly "stick on" headlights on an otherwise flowing bodyline car. Later learned that the 57 was supposed to have quad headlights (ala 58) but a last minute regulation forced them to alter the headlights back to singles. I think the Nash had...

Was responding to a new car issue and it went off the rails, decided it was better to just start a new low value thread. Id never buy a new car or truck...again. Whats the upside? You got the new car smell and a warranty that's not worth squat. Downside: You lost 30% when you drove it off the...

Ill do a review of this can of sand.... patient is my beater Mazda. The guy cut the head too much and now Im still getting a few drips from the head gasket area. So, I got a week to kill and I never drive the thing so Im going to give this product the test. First impression is the stuff...

success!

interesting ad on Craigslist. Guys got a bunch of "Vintage funny car stuff". Just odds and ends but maybe something worth a call to. sorry, no phone number but if you hit reply it will post up a mail link. Check it out: "A/Fuel (nitro) intake manifold and injectors for BAE FatHeads" Misc...

Looks pretty good, like new? $300 Ebay buy it now out of San Diego. Not bad for a new looking intake, not mine but its not posted as a Mopar piece so there may be little traffic on it. weiand hi tunnelram | eBay

So my wife is in the drive though and gets her lunch and is rolling out, rolling her power window up in the 2012 Dodge Caravan. She hears a loud POP and thinks she hit the side mirror on something. Meanwhile the driver window starts to slide down into the window by itself. She hits the up button...

1000 bucks for a 64 Valiant 'vert...yes! I'd jump on this but I dont have garage space. Looks workeable and only needs a hook to drag her home...Not mine. MURDERED OUT MOPAR ROADSTER '64 PLYMOUTH VALIANT..RAD.. PROJECT!!

was getting minor and major leak codes on scan tool (and obd2 display in odometer- turn ignition on/off 3 times and read on ) so I replaced gas cap, didnt fix so I replaced perceived leaking (by my mightyvac, which turned out to hold vacuum without my mightyvac hose) the vacuum purge control...

What did you get? cool cars you wanna post up? I got a chrome M/C lid and a 45 degree chrome water neck, a buck each! I got some old *** Cyclone 64-66 "A" fenderwell headers for...$50! Got a NOS Arrow Racing cast Aluminum LA timing cover for...$40! Electric D/A sander...$1! Holley 1850...

just did my 2002 3.8, a few tips: 1.loosen 3 13mm bolt pulley with serpentine belt still on, itll hold it steady enough to break the bolts and loose enough to maneuver the bolt position. 2. Keep unmounted pulley on the pump, you wont be able to get it off so don't fight it 3. remove 5 10mm...

Getting a large amount of water out of tailpipe, like a 24 inch driveway stain after shutdown and 20 minutes. Its a 3.8 and i just repaired a broken pcv hose thgat was cracked and leaking. Is this just the motor catching up on weak pcv or am i screwed, ie cracked something, bliwn head gasket...

I mean bad as in terrible bad. I was looking for those lame jacked up muscle cars of the mid 60'S but I dont know how to search for them. These cars had bodies that looked like they were on stilt maybe 3 feet off the ground while the rest of the car was low. Hot Rod tried to explain the...

Want to pull my 96 Breeze/Neon transaxle to hunt for a nasty ATF leak. I think its the convertor seal or a cracked convertor. I get a 6" puddle every time I stop. Will do it in my driveway: jackstands, ramps, cherry picker, pneumatics..just dont want to hit a snag, ie special tool or puller for...

How do you get it off? Do you need a spanner wrench, or whatever the ones that look like hooks to unscrew the retainer ring? I am stuck with no car....TRied to tap on ribs but they just break off.

How about a 80 Benz 380SL with a real hemi in it..and a shaker at that! Make that a 426SL....

I didnt know this but if you go to pickyourpart.com and select locations, you can search vehicles in the yard by manufacturer! It shows date dragged in only so if its been a while you know it may be only a car-cass....but it beats going there and finding nothing but 1999 Intrepids...

plastic EGR solenoid on top of EGR valve...are you supposed to be able to pull a vacuum off it? I used a mighty-vac and it wouldnt hold a vacuum, just bled it off. I broke the hard brittle vacuum line to this when changing a valve cover. I replaced the line but the car still stalls when going...

Any one in B.C. know a Bob Harris? He posted a pic of about 20 Barracudas in his yard in various states of completeness on H.A.M.B. and was told he is selling. I got his number but wanted to see if he was out there to confirm. Look up "school of fish" on jalopyjournal

Who would have thought Ma made these... but I guess rules are rules... http://www.ebay.com/itm/Mopar-W2-4bble-Cast-iron-intake-NEW-in-box-/390401983755?pt=Motors_Car_Truck_Parts_Accessories&hash=item5ae5c5850b&vxp=mtr#ht_2236wt_1396

8 3/4 rear end in a green C body wagon at Ecology off Eubanks in Wilmington (couldnt see casting number) . WAY in the back corner, 440 in there too minus the carb. Another 440 in a 72 New Yorker on the right before the Chrysler section, Looks all there except its rear end. Has a TQ on it too...

My sis is going to run a few off for me and was going to take a straw poll on who may be interested in buying one. Im thinking either adhesive,magnetic vinyl or adhesive sticker? your choice of displacement. Getting the final dimensions worked out so it lays in a circle on the slightly conical...

anyone know where the keyless entry receiver is for the 02 town and country? I need to match the freq to a key fob if at all possible. Or hack it for another brand. I dont have the original fob

We all shop at Jeggs, Summit, Harbor Freight (you know you love it...) yadda yadda and we get coupons from time to time that may be redeemed online or mail order. Maybe we can get a thread going that shares the coupon codes? Here is one to start it off Summit: ZQ81230504 $20 off next order...

Pick your part on Beach in Stanton has a 77 New Yorker compete pan to air cleaner 440 w/TQ still in the car. Half price zoo is over but I was just there yesterday. Doubt anyone even noticed it. NO other rear wheel drive Mopars there! Didnt even get into the one on Katella, no parking...BUST...