Search results for query: *

Any members near Rockingham, North Carolina? How's the weather? The Modern Hemi Shotout is this weekend and I'd hate to make the 6 hour drive from Georgia into thunderstorms.

Summit Racing Scratch & Dent sale. Wiseco pistons, .030 over for $300. Anyone used them. How much lift can they take. Need an answer fast!

Summit Scratch & Dent. Demo head. Bare for $380. Comments?

Home Depot has a Dewalt oscillating tool with charger and two 2ah batteries for $99. My question is can I use it for bodywork? I plan to replace either my lower quarters or the entire quarter panels on my Duster. Just looking for input before I buy it. Any other uses do I need to know about?

Gonna replace damaged panels on the car. Where do I get shielding gas and cylinder? They are much cheaper online. I've see a size 3, 80cf bare cylinder for $192. Full for around $230-$240 from same supplier. Any suggestions, experiences with and suppliers?

I know this is a dumb question but do these seats recline forward so someone can access the rear. I've read they are called jeep seats. Just want to make sure before I pull the trigger on a set. A member here with a blue Duster 4 speed with a pistol grip has them.

Just got back from AMD. I'm about an hour away from their Gainesville, Ga. location. Paid $535 for the pair. Shipping would have cost $687 to the house. They seem lighter than stock. They are for a '72 but I have a '71 with different marker lights.. I plan to fill them in anyway as I don't care...

I'm getting rid of my crappy aftermarket valve cover breathers and going with a pcv valve, air oil separator, and a push on breather that vents to a factory '68-'69 small block air cleaner. Does the pcv valve and breather require a baffle underneath?

I live in Decatur, Georgia and I was wondering where to get my car weighed. I don't race the car just want to know. Any guestimates? The car is a '71 Duster with a small block, TTI headers, 2.5" exhaust, bench seat, no heater box,manual brakes and steering, stock K frame and suspension, 833 4...

My birthday was this past Tuesday. So, I went to budget rental car and got a Challenger Scat Pack 6 speed for the week! By week I mean seven days! This thing is a blast. Gonna be hard to give it back. Never had so much fun with my clothes on. If any of you get the chance, do it. I lucked out...

Just saw on DriveSRT.com that Tom Hoover, father of the 426 Hemi has died. The site didn't share any details. Just wanted to pass the info along.

I've posted my first video of my Duster idling on YouTube. Can someone explain to me how I can post a sound bite here? I'm totally lost!

I need the windshield replaced in my '71 Duster. Who would you guys recommend. I want an OEM windshield with a lifetime warranty. I've gotten cheap quotes on aftermarket glass but the more questions I ask the higher the price seems to go. I have the gasket and locking strip already. The shops I...

Went to a test drive a 2012 Challenger SRT8 6 speed this past weekend. I was totally blown away! Compared to a regular R/T, this is a completely different car. The suspension is much tighter, handles like a champ, but most of all, this thing pulls like a freakin' freight train! That 6.4 HEMI is...

Alan Johnson has clinched the Pro Stock Championship for 2012!!!!!!!!!!!!! :headbang:

Anybody ever used Windshieldstogo.com? I got a quote to replace the windshield in my '71 Duster for $229 total but Safelite wants about $330 plus possible mobile fees. They sell the windshield alone for $129.

Carroll Shelby died the other day at 89. Just wanted to pass that along.

Just installed the 414 stroker in my '71 Duster with TTI headers. I have a 440 Source mini starter that hits the header & will not fit flush against my Quicktime bellhousing. Which starter are you guys using or how do I fix it? Can I "pursuade" the header to move a little without damage...

I just wanted to share some tire clearance pics for someone who might need it. The tire is a 2756015 BFG TA, Super Stock springs have been moved in 3/4". There is 1" clearance from fattest part of tire to leaf spring. The car is a '71 Duster.

I'm currently making my own frame connectors for my '71 Duster. Just finished the driver side. My question is, should the car be resting on it's suspension when I weld them in?

I won tickets to the NHRA Southern Nationals from local radio station Rock 100.5, the entire weekend!!!!!!!!!!!!!!!!!!!!!!!!!!!: Just got a call from the DJ. I'm the grand prize winner!!!!!!!!!! I get the race the DJ. If I win I race Bob Tasca III.

Anyone know what a typical smallblock camshaft weighs for shipping purposes? I don't have the cam with me to put on a scale. Anyone?

Anybody ever install a windshield? Should I install the seal on the windshield with adhesive first & then install the assembly on the windshield frame or should I let a professional do it? It's my first time. I'm a virgin.

Sent Jamie Passon an E-mail about his upcoming 5 speed. He stated that they're hoping to have it ready by the end of winter. So, next March,April?

I'm about to put my fuel system together and need to know whether I need a regulator with a return line. The car is a '71 Duster with a 360/414 smallblock stroker, (460hp/511 torque), 800 dp holley, air gap, Mopar ported iron heads, Comp 242/[email protected], .558/.573 cam,TTI headers, 2.5 exhaust...

Anyone went to the Mopar Nats this past weekend? Was McLeod or Passon there with their new 5 speed tranny on display? I'm contemplating just getting the Tremec from Keisler and sending it to Liberty to cure the 2nd to 3rd gear shifting issue.

Anyone experienced setting up rear ends? I'm assembling a narrowed 9.25 axle for my '71 Duster. The problem I'm having is no matter what pinion shim I use the drive side pattern stays low on the toe. Backlash set within specs at 6-10 thousandths.The instruction booklet I have with the Auburn...

Does anyone know the flange to flange length of an empty A-Body rear without axles or brake backing plates?

Can anyone tell me how to remove the ignition lock cylinder in a '71 A-body steering column? The part the key goes into. I'm replacing the steering column but the one I have has no key.

Has anyone used the Quicktime Enginering bellhousing with TTI headers on a smallblock? I've heard the TTI's will make contact with the Lakewood bellhousing.