Search results for query: *

I have changed upper and lower radiator hoses, thermostat, and added fresh coolant. I have looked inside radiator and seen the coolant moving so the water pump is working. However, as soon as I starti up the temp gauge goes dirctly to 250 degrees. How does the gauge get its signal? Where is...

Wondering it there was an advantage of either Sea Foam or Sta-bil your car, boat, motorcycle, and/or lawn mowers. Does anyone else use them? Worried aoubt the ehenol content of gas and the damage it can cause.

Does it matter? I have been told mount it vertical to allow it to cool properly because of being oil filled. However, the stock coil on my 318 is laying down. Does it matter?

Looking at Taylor's Spiral Pro wires with a 90 degree boot. It is very tight fit on a couple of plugs with OEM exhaust manifold and straight boots on 318. Is this a good choice of wire set?

Needing wires with a 45 or 90 degree boot. I have straight boots on now and on the driver side they are realy hafd to connect because of the exhaust manifold. Looking also to change out plugs. What combo do ya'll run in a '74 318 with a 4 barrel. Will also be changing manifold to Performer...

Love the look and stance of these racers.....just wondering what are the requirements for a drag car to be classified as a gasser? Thanks...........

I have a slight shimmer in the front end I can feel in the steering wheel whenever I apply the brakes. I have disc on the front and drum on the back in a '74 Duster. Can any one give me some direction of where to look? This is the only time I notice the shimmer. Thanks again guys !!!!

Need a set of front black seat belts for 74 Duster. Where is a good on-line source to find a set????

Looking at metal hoses from either a hose from Specte Performance or Summit. Looks like Summit offers the same thing under their name. Any suggestions or ideas??????

With a '74 318 would it be OK to remove the charcoal cannister to clean up engine compartment? Any drawbacks or problems with this? I have stock exhaust manifolds right now with duel straight pipes running out the back. Thanks.............

How is the best way without damaging anything? Mine are on very solid and can not get a putty knive in between to use as leverage. It appears they have been on for at least my life time anyway.

Putting Mopar Performance valve covers on my car and was wondering should I put Black RTV on both sides of the rubber gasket or just one side? Just wanted to be sure before I start. Thanks.............

I have heard ya'll talk of the ignition box going out while driving. Is this the same thing as a ballast resitor? Thought I would get a spare for my tool box but could not find the thread. It was no more than a couple of months ago. Thanks...............

Just got my MOPAR valve covers. What is the best method to remove the plug so I can install my PCV valve and breather? Thanks for the help.

When I bought my Duster it came with a 318. Someone had installed a Eldebrock 750 on the stock manifold. I am having no problen with the fuel system or its performance. "Charlotte" has stock exhaust manifolds but has duel exhaust all the out the back. Looking to change to an aluminum...

Was wondering which auto transmission was normally installed. 904 or 727? also what was the standard rear gear on the car out the door? Just wondering so I know where I stand. Got the car...but no info about it. Thanks for the help.

What is the difference in the two when talking of 1974 Dusters? It makes a difference when looking up NADA values. Thanks again for ya'lls help.

On a '74 Duster how do I tell which automatic transmission I have? Just wondering before I order a gasket for the transmission pan. Thanks for the help.

..........when discussing wheels? This may be an elementry question but I would like to know. Thanks...........

I need a recovery resovoir for a 1974 Duster. There is a large gaping hole in the bottom of mine. Don't really like the look of the square universal resovoir they sell at YearOne. Can anyone help please?????