Search results for query: *

Anyone using a Holley Street Dominator single plain intake...it has the smaller 318 size ports also....Thinking of using it .... Using a holley performer intake now and wondering if the car will pick up with the this low profile single plain intake. stock 1968 318 .225 @ 50 cam..... .453 lift...

Well i went to the track again tonight to try and get some tuning done on the 67 cuda and enjoy some bracket racing also. I took off my 7 blade stock fan and installed my clutch fan --knowing full well -- the motor would be running a little bit hotter.:angryfir: All in the search for a quicker...

509-557 cam in 318?? Has anybody run one of these purple shafts in a 318. What convertor did you run (stall speed ) I am really wanting to run a 4800 to 5000 converter.(9 1/2 dynamic)--with a big duration cam. Thanks for any feed back.............:thumbup:

I might put a .474 mopar cam in my 1967 318. I have a 3 grand dynamic convertor and 3.91's and possibly thinking of porting the heads. Anyone ever port a set of 920's................. My buddy has a new home made flow bench all set to go. I already own the cam and lifters and have a holley...

I just bought two holley street dominator intakes and they are in really good shape. I like them because of the small --318 size-- intake ports and are also a single plain intake. Just wondering if anyone has used, or runs one of these intakes. :burnout:

I Might be getting a set of eagle SIR I beam rods. The rods were made in 2002 and lived in a stroker small block for a short period of time. The engine smoked the cam and then was taken apart -- i was told. I was wondering who has used them and if you had good luck with them. ***Please let me...

I painted both my small blocks with long model brushes from the dollar store. They worked really good and i didn't get a bunch of over spray on everything like i always did. I did about three coats and it looked slightly dull,but once the engine was fired up and it warmed up to temp,the paint...

I am posting this information in this section to help any other members with mopar crate engines that have a problem getting them to idle due to a rich condition at idle. The cams that mopar performance use in their crate engines will carry a very low vacuum signal and can cause problems with a...

I am very happy with my 318 in my 67 cuda. I installed a 750 proform carb last week and just this morning installed a 3 inch thrush welded series muffler system. The car runs great and roast the tires in first at any speed. This ones for all you small block people. Let me know what you...

I went over to the garage to take my 750 double pumper carb off my 318 and got a little side tracked. ENJOY MY CHILDISH ACTIONS :thumbup: http://s1104.photobucket.com/albums/h337/t67power/?action=view&current=PICT1566.mp4...

I feel like a mad scientist.......................:glasses9: I am selling my 750 double pumper on my 318 cuda and will be installing a 850 proform carb. Why would i try such a foolish thing ........................ I am basing this on David Vizards testing done on a 383 chevy. He installed...

Anybody using these rockers???? Do you like them???? I was thinking of getting a set for one of my small blocks. It would be nice to use a set of 1.6 ratio rockers for cheap. It's the cheap part that I'm not so sure about. :burnout: Thanks for any info.

Just wondering what the average rpm's are for your shift points. Please list the cubic inch , camshaft and cylinder head being used. THANKS :thumbup:

Who makes the cheapest new valves??

I chose to put this here instead of the transmission section, because it has to do with small block cam selection. -------------------------------------------------------------------------let When choosing a cam for that small block, the biggest thing one should consider is the converter...

I forgot that I got this information and with some resent threads on cams I figured I would post it. I called mopar performance parts many times in the past and have got to know some of the guy's pretty good I called on the .484 purple shaft grind and they said he could not find any kind of cam...

I was thinking of installing a solid cam in my 360 and will need a new set of adjustable rocker arms. With so many on the market,i am looking to get all the info. i can on real world performance and durability. What roller rocker arm set up do you use. Are you satisfied or unsatisfied with the...

I was waiting for the light to change today while i was driving my 1967 barracuda around town. The car next to me looks over and says ---NICE CAR MAN!!!:supz: He also said he had not seen one in a long time. I said thanks for the compliment and smiled.8) Turning back towards the light to make...

I was at lebanon valley ny dragway today for mopars at the valley and bought some spark plugs off this vendor. They where in a mopar box, and they have the mopar name on each plug. They are really just a champion plug #65. He sold them to me for a $1 a piece. I bought 16 plugs. I have never seen...

I really enjoy driving my car late at night on the highway because of the open road ahead of me, and with no traffic, it's just me and my ride. On my way home tonight, with the engine sounding so smooth, and the cool air keeping the temps down below what you would normally see in the heat of...

I bought a gallon of lucas 70 weight racing oil at pep boys for $9.00 because it was half price. I have used nitromethane oil as an additive in my engines before because i got it real cheap. They are always heavy weight oil 50w/60w/70w. It's just a heavy weight oil with an additive package...

I have been giving my 360 engine 5 quarts of oil at every oil change and have always had a reading on the dip stick above the full mark. So when i changed my oil yesterday i filled the filter(ph43),with half a quart of oil. I then put in 3 1/2 quarts and started the engine. With only 4 quarts in...

Is anybody running 11.1 or more with a steel cylinder head on pump gas. If so, what size is the cam @ 50 thousands lift. Or better yet,what is the intake valve closing point. Example:70 degrees ABDC Also ,what kind of piston and...

I was thinking of advancing my cam in my 360 for more cylinder pressure. The first thing i was going to do was check my piston to valve clearance by installing checker springs and measuring with a dial indicator. Well --- when i filled the cylinder with air and compressed the valve spring, the...

MSD sells a replacement cap for the small block distributor. It is the same as a stock chevy cap. The only difference i see is that the MSD cap has brass contacts. The stock chevy cap has metal contacts but is only $7 bucks at the store. The msd cap is $20 bucks plus shipping from summit. HAS...

Small blocks use a positive seal on the intake valve and a umbrella seal on the exhaust valve. I was wondering if anyone has used the positive seals on the exhaust valves? I used positive seals on my 360 after cutting the guides with no problems. On my 318 that i just bought, i was thinking of...

Just wondering how hot your small block run's? My 360 stays around 180 to 190. My 318 on the other hand seems like it's getting a little hot. By the looks of the stock temp gauge, it's running warm if it get's in the 80's outside. I will check it with a temp. lazer the next time it get's hot...

I always jetted my cars by the way the plug looks but recently i started to jet by the color of the piston tops. I bring the piston to top dead center and look at it with a mag light. I am finding that this is a good way to jet my cars. piston color is as follows:1) BLACK= RICH...

I found 20w50 shell oil at advanced auto parts on clearance, and since i bought it all ,they gave it to me for $20 bucks even per case. So I bought 7 cases. Then also in the same week, a friend of mine who works in a parts store, got me a case of oil filters for $20 bucks a peice ,so i went back...

I found 20w50 shell oil at advanced auto parts on clearance, and since i bought it all ,they gave it to me for $20 bucks even per case. So I bought 7 cases. Then also in the same week, a friend of mine who works in a parts store, got me two cases of oil filters for $20 bucks a peice ,and there...