Search results for query: *

HI all, Does anyone have this book? I was looking for the engine package details in the back of the book for a 318 combo that uses the stock 318 heads etc...Its the last combo before using 360 heads. Cheers for any help

Hi all, I have been building up a mild 318 for a daily driver and have gathered all the parts to fuel inject it as well. I will be using a Megasquirt for the brains. What I'm worried about is the fact that the engine probably wont start first turn of the key and will damage the hydraulic...

Hey all Been doing a lot of searching on the forums for a mild 318 build to match mine. Looking for a mild mannered street cruiser around 230 to 250 HP. This is what I have a 40 thou over 318, cast pistons, expected 8.5:1 to 9.0:1 ish comp ratio, heads have had a match port and minor bowl...

http://www.hughesengines.com/Index/products.php?browse=search&search=5321&searchmode=partnumber&partid=26114 Just wondering if anyone out there is running this type of setup or if anyone has opinions on them. I would like to fit them to an early seventies 318 for the following reasons: I like...

Hey all, piston choice question. I've been all over the site and this is what I've come up with regarding forced induction and pistons. 1st choice is forged. Second choice seems to be cast or hyper depending on the thread. Guys are running both cast and hyper with turbos and superchargers and...

Hey all, just wondering if anyone had a base map for a megasquirt setup on a 318, looking to just get it started and tuned from there. I am using 318 heads, small port holley street dominator intake with two 65mm throttle bodies and injectors from a 297kw LS1 and Innovate LC1 wideband. I have...

Hi all. Have a disaster here. Had a small port Holley Street Dominator converted for injection for my 318 project. I needed a small amount milled off the heat crossover on the right side to clear my TPS. I drew a line in pen where it was to go but I had a miss understanding with the machine shop...

Hi all I have been scouring the net for ideas on an engine rebuild, I have the how to hot rod small block mopars by larry sheppard and about 50 bookmarked internet pages. I currently have a 318 with KB167's, standard stroke, purple shaft 340 muscle repro cam (268/276 duration 429/444 lift)...