Search results for query: *

Anyone compared the height of the Edelbrock RPM Air-Gap and the Speedmaster? Are they the same height? Searched but couldn't find this info anywhere. Thanks.

There seems to be plenty of, "Anybody know a good engine builder in -city, state-?" Just thinking that it would be a good idea to have a sticky directory of engine builders that have done good work for us MOPAR guys! Thoughts?

Does anyone know what the chamber sizes are on 71 360 j heads and 71 318 675 heads? Can't seem to find a straight answer on the net Thanks -Alex

Anyone have experience with the company Blueprint Engines? I just saw them in Jeg's and visited their site. Engines actually look pretty well made from what I can tell and they offer a Magnum headed, rpm airgap, 408 stoker 360 rated at 395hp/475tq for $3600. Block: Seasoned 360 block...

Does anybody know what Magnum heads flow in stock form? Are the numbers different between the 92-01 and 01+ heads? Are the heads different? Edelbrock has RPM Magnum heads available. Her are the numbers Flow Data Edelbrock Magnum (PN 61771) Lift In (cfm) Exh (cfm) .100" 62...

How many of you use, or know someone that used, magnum heads on their 360 a engine blocks? I've been reading about this and am interested to learn more as far as street engines. Do they flow well enough in stock form to support 400hp? They need different head bolts right? The come with 1.6...

I decided to replace my distributor cap and rotor. The new cap had a "1" for the number one wire. When I went to take the wires off the old distributor I noticed that the old cap had it too but that's not where the wire was. The Number 1 wire was in the number 8 spot, 8 was in the 4 spot, and...

So after educating myself on all the useful timing articles I could find on the net and buying an advance timing light(FINALLY) I just got back in from setting the timing on my 1971 Demon 318 with all the bolt-ons and mild cam. Daily driver. I checked where it was set first and then I...

I was just wondering what the differences are between the mid-70s 318 heads? 2843675 318 1968-74 1.78 1.50 3769973 318 1975-83 1.78 1.50 What's the difference? -Alex

I am building the following engine: 71 360 short block, zero-decked KB 107+.03 pistons Eddy RPM heads and intake Comp XE 274 cam I am considering either comp rollers or crane rollers. This car will be mostly street driven with little track time. Has anyone else used this recipe? If...

I finally got around to doing a compression test on my 318 w/ 360 J heads. Don't know if the heads were milled because this was done before I got the engine. I got 110 to 115 on every cylinder. What does this work out to? Is there a compression chart or something I can follow? -Alex

I am thinking of buying the following '71 360 engine as a starting point for my build. I emailed the guy selling it and this was his reply. Is this something that is fixable with the .030 over bore? "Yes, I do still have the 71 360 longblock. It was a 63,000 mile engine that haed never...