Search results for query: *

  1. C

    Anyone with an old PAW catalog look up the specs on the SSI 11310 cam?

    Looking to see what the specs were. Thanks
  3. C

    I was hoping it would be better

    When I bought the Aspen R/T, it came with the numbers 360 engine. Owner said it had a knock, so they pulled it and built a 70 340 engine. I was hoping it was something stupid making the knocking sound, like loose converter bolts, etc. Not so lucky! Rod bearing shells from #1 and #2...
  4. C

    Anybody run a SB Edelbrock Perf RPM cam?

    Namely looking for input on the 7177 grind. 234/244 at .050 .488/.510 112 LSA Thanks
  5. C

    Porting some 596 heads

    With all the crap that happened recently, I decided to take out my frustrations on a set of 596 heads. I haven't ported a head in 20+ years, never done a pair of SB mopars, and the last set I did was a pair of BB Chevy heads running a huge roller. I messed up one port at the pushrod pinch...
  6. C

    Ede Victor Max Wedge port flow numbers

    Friend of mine had these in his shop and tossed them on his superflow 600. Lift. Int. Ex. .200 144 117 .300 212 167 .400 262 205 .500 289 231 .550 306 241 .600 323 248 .650 334 251 .700 336 255 This is at 28" on a 4.35 bore. Valves are 2.200x1.810 and eddy valve job. No work was...
  8. C

    Smoked 360 I bought

    I bought a smoked 360 that was just rebuilt. Took it apart and the #2 and #5 main were down to copper, some of the rod bearings were showing copper. This was on an engine that had about 1 Hour of run time and showed solid oil pressure the entire time. All bearings installed correctly. The...
Back
Top