Search results for query: *

  1. iggys68dart

    plug wire magic

    i bought some new wires today and was having a bad time cutting and putting on new boots but found out using silicone spray made my job 10 x easier on that job just trying to pass it on cuase i was having a very hard time earlier on intalling and was looking for trick it turned out to be silcone...
  2. iggys68dart

    plug wires

    i was at local parts store and found some blue super stock accel wires on clearance will these work on my older 318 model# was 5040b they was marked down to 13 bucks so i grabbed them and was hoping they would work on box it said hei or non hei
  3. iggys68dart

    heads

    how do you tell what kind of heads you have ,thanks
  4. iggys68dart

    yes or no

    i have a chance to buy a 78 318 with edebrock intake and msd ignition and comes with tranny, dont know what trans is but it came out of a wagon for 300 dude said it dosent smoke but i cant hear it run as it is out of car and also no carb i have a friend that says guy is cool but im scared of...
  5. iggys68dart

    dart no start

    been raining all day here and so around 5 i wanted to go somewhere and car wont fire it sounds like dist is wet but i checked that also i have about 2 inches standing water on floorboard paas side its getting gas and ran fine yesterday i know i should pull plugwire but its just to wet out there
  6. iggys68dart

    first time build

    i am looking to start gathering parts for a stock to mild 318 build can anyone suggest a parts kit that wont kill wallet or am i better off gathering pieces one at a time
  7. iggys68dart

    air cleaners

    looking to get another air cleaner for my 318 has anyone used the washable type and if so was you happy with it
  8. iggys68dart

    horse power

    way down the road for me but i notice a lot of posts on turbo applications what are pros and cons of building a bigger motor with nitrous to a motor with turbo
  9. iggys68dart

    not a happy day

    found a little bit of water in my oil and was wondering if that always means head gasket or cracked head or could it be intake leaking there is no oil in water so whats my next step
  10. iggys68dart

    blow by

    i am getting a lot of oil pushed back thru dipstick and breather on one of my valve covers my pcv is clean as is hose is there any way i can fix this without rebuild i am pretty sure that is what it will take but trying to make it last until vacation check as it is my primary wheels
  11. iggys68dart

    buying used motor

    i know a guy not that well but has a 87 318 with a 904 trans and he says it has aluminum intake and ran well i think it came out of a aspen wagon is 300 too much or should i grab it thanks for all response either good or bad or just laughing at my build lol
  12. iggys68dart

    clickity clack

    my 318 makes a clacking sound around 2700 rpm on highyway the motor is tired but im trying to baby it until i can afford swap or rebuild as it is my daily driver i have played/messed with timing and motor seems to run fine to me but i am no expert it seem to crank well otherwords it fires right...
  13. iggys68dart

    identify motor

    i met a guy today who works at a towing place and he told me he has a dodge truck with a 318 or 360 in it how can i tell the difference on 318 340 360 motors do i have to check block # or is there a easier way to identify right away truck is a 82 bye the way 4speed
  14. iggys68dart

    wtf

    just went to store and car died at light after turning over a few times it fired up and would idle high then drops way down and dies unless i pump accelerator just changed plugs checked out carb and i was thinking timing but car ran great till tonite any ideas i got all night to work on it as it...
  15. iggys68dart

    need opions on motor

    recently my 318 has been running rough i changed plugs tonite and now it idles up and down if i go to put it in drive it shuts off if im not pedaling the throttle any ideas anyone i also adjusted the carb usig vaccum gauge for idle somewhere in the mix something is wrong i had to adjust idle...
  16. iggys68dart

    torque specs on intake

    just installed lokar cable and want to remove existing throttle bracket is there a specified torque or seeing as i am not removing intake can i just wing it a bit the motor is a 78 318 almost forgot that part
  17. iggys68dart

    another stupid question

    i read a lot about la motors and now i read about ld motor can someone tell me what is the difference and how do you tell wich is what
  18. iggys68dart

    timing question

    i have a worn 79 318 in my 68 dart i was told to remove vacum line and set timing to 3 to 4 degrees above then attach vacum and bring idle down to 650 750 rpm does this sound about right also i was told when i change my plugs since i have electronic ignition i need to gap the plugs more any help...
  19. iggys68dart

    adjusting valves

    may be a dumb question but i was wondering if you adjust valves on a older 318 like you would a chevy this is my first mopar besides a 76 cordoba when i was younger iseem to hear a little tapping or slight rattle on the interstate if i go to pass @65 to 70mph
  20. iggys68dart

    318 vs 360

    i will be building my first motor and would like some performance for the buck so should i be looking for a extra 318 or go with 360:argue:
  21. iggys68dart

    older motor oil change

    i have a 78 318 and it has a little smoke while accelerating i know its worn but wich oil weight should i use at oil change before i can afford rebuild
  22. iggys68dart

    older motor oil change

    i have a fairly worn 318 that will smoke a bit while accelerating what type or weight oil shoul i try when doing oil change until i can afford rebuild i tried a additive stp and it stopped for about 1 day any suggestions
  23. iggys68dart

    identify year of 318

    please tell me where vin is on blck of 318 and how to figure out year
  24. iggys68dart

    318 power

    need opions on rebuilding 318 for a little extra horses on the cheap its still a daily driver 68 dart but would like it a bit more peppy
Back
Top