Search results for query: *

Hey guys, well about 2 months ago i pulled the barracuda outside to blow it off from all the dust that had collected on it from all the body work, and when i started it up it had a lifter tick. I though maybe it would go away after oil pressure came up but it didnt and now it ticks bad :( bummer...

hey guys i was wondering on something, im putting a eddy performer intake with a 4bbl holley on my 69 318, i was wondering are the gasket sizes/ports different sizes? Should i just get a set of 69 340 intake gaskets so that i know the intake port are the right size i dont wanna put a small...

Hey guys well tonight i finally riped apart my holley carb with my friends assistance, and he was telling me on how he and others have put metering blocks on the secondary sides of holley's so you have jets you can tune, this also eliminates having to drill the secondary holes to flow more for...

im buying a holley 1850 (600cfm) i dunno about the secondaries. carb and edlebrock intake (rpm) from a guy i work with. it came off of a 318 and i wanted to know how hard it will be to rebuild the kit is $22, and im buying everything (w/o kit) for $100. how does that sound to me it sounded good...

well go figure my car is going to fight me all the way, i got the engine installed, then bad waterpump, leaking bypass hose and trans dip stick woooo not, anyways, well i got my waterpump back in, fixed the snaped off bolt and such now it wont fire. it turns over for ever, has fuel, spark (maybe...

I am stripping my engine in my shop class and i need to take out the oil galery plugs to have it dipped. Is the size 5/16's? 3/8 to big and 1/4 to small its not like 11/32's is it? and in the engine kits do they come with new ones my teacher says yes but i was thinking (again he more ford/Chevy...

well i finally got my 360 pulled so i can rebuild it and swap it for my dads 340 engine that is in his truck. Just though id post up some pics :angel9: any sugestions on where to go to get a rebuild kit, like pistons, rings, gaskets and such, i need a timing chain too. I saw on summit there...

Well i am going to be getting a 340 here soon down the road for the cuda :thumbup: i cant wait, but i was wondering should i buy the: How to hotrod SB mopar Engines I am currently in a engine rebuilding class and have access to a head machine(does valve grinds and such) And we were...

Hey guys well the other day when i was moving around my cuda, i got frustrated, the car runs like crap, it idles crappy, aw, well i was gonna swap a 360 into it, i was gonna build it first, but hell maybe i should just swap it in place of the pile 318. The 360 needs a timming chain, and id...

Ok today when i was going to install my inspection cover for my trans, the one that came with it didnt fit :cwm10: grr, and while i was under the car i saw the date code woohoo..then i say 89....omg lame :wack: anyways, i was told it was a 318. but i am unsure, its definatly a sb ha thats good...

I went to my local parts store today to pick up a ps line that i had ordered for my cuda. When i got to the store i inspected the item, and notied the line had one male and one female end. This does not match up with the way my ps is, on the pump the hose/line should be male, and on the...

ok on my 318 i have 3 pullys on the crank, one at the fan, 2 on the alt, and one on the ps obviously. how can i fix this to run one belt alt,fan,crank and crank,ps its really messed up now its running the closest pully to radiator to alt, and i believe middle pully(crank) to fan, then to...

Well i cant drive my car cause the ps is leaking(which i have to disconnect the belt so no water pump(wrong belt config) does anyone have directions on how to fix a ps pump, i believe there is an artical in mm i'm still looking for it. btw i found a 72 duster in my area(3miles away or so)...

My 69 cuda has a 318 in it. It came with a 383 when i bought it but i dont think i wanna go big block. i have a 360 out of a van that i was thinking of putting into my cuda. The 360 i presume is going to have to have a complete rebuild, the 318 runs as of now also. I would like to know what...