Search results for query: *

Hi all, just wondering what size carby I should be running on my 340? Engine mods are: Ported Eddie heads, crane 1.6 rockers, Head flow numbers. LIFT--IN/EX IN EX... .600"--276.6/218.6 34.4 33 .650"--283.5/221.6 40.3 36 Manifold is a port matched victor junior 340, cam is a comp solid roller...

Hi, just wondering if I can use the magnum pushrods in a LA SB? I'm running a solid roller and need a size 7.34 inch chromoly pushrod(ball & cup)that comp cams sell off the shelf but they suit a Magnum engine.

Hi, can anyone tell me which oil line goes to the "in" of my remote filter please?....im pretty sure it's the bottom line but not 100%?

Hi, what spark plugs should I run in this 340?....thanks in advance. 10.5 compression, edelbrock alloy heads, forged pistons. Mopar performance ignition.

Hi, I've got an inquiry about the ARP main stud kit I'm installing in my 340. The stud in the rear cap doesn't sit down enough to allow the oil pump to bolt down(first pic). The kit also has two different types of nuts( second pic).....do I use these nuts without a washer and trim down the...

Hi, Just wondering if these alloy oil pump drive shaft bushes are any good? Or should I chuck it and get a bronze one?

Hi all, Just a quick question about oiling mods on my 340. Will this lifter galley crossover tube be okay in this position?(first pic) Or does it need to go in the second pic?

Hello there, Just wondering what the advantage is grouting your block?? I have heard about people doing it but not sure why, And how do you go about grouting it, Can you do it yourself or do you need to take it to a machine shop?? thanks Doug

I just seen this on my Australian club sight, not sure if it's been up here before?? http://bangshift.com/blog/chrysler-unobtanium-a-real-late-1960s-weslake-plymouth-indy-engine.html

I`m looking at buying a compcam custom grind billet solid roller cam that's done 12 dyno pulls only for my engine, The specs are 246 int 250 ex at .050 110 isa .608 lift with 1.6 rockers. The guy that's selling it owns a engine shop and said it should suit my engine nicely?? I have a set of 1.5...

Hello, Is this manifold for W2 or LA heads?? These are the only photos in the add.......I`m thinking W2. Cheers Doug

Anybody use one of these?? If so how would you rate it?? If there any good I`m looking at buying it for my 340. Thanks Doug

Hello All, I`m looking at buying a second hand victor 340 manifold for my(stock strock)340 build, It`s in VGC & a good price. Just wondering who has used one & what there like?? Or is there a better manifold out there that will suit my heads?? There a set of eddy ported heads, Here is the run...

Hello all I have a mighty demon 4bbl carby that I want to store for a will, what is the best way to keep it fresh for when I go to use it down the track. Cheers Doug

Hello All I have a set of alloy heads that I need to clean, There is scale build up in the water jackets and they have old head gasket residue on them. What is the best way to get rid of the scale??, And what`s the best way to clean up the the old gasket residue of without scratching the...

Hello All Just wondering if anybody has done a thread on porting eddy heads?? I`m looking at doing a lite porting job on mine, Some info & photos on where to touch them up would be great. Thanks Doug

Hello All Just wondering if anybody has used this cam and what`s the verdict on it?? Here is the link: http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=671&sb=2 I have this combination: 40up 340 10.5 to 1 compression Ported J heads flow 265/270 Victor 340 single plain 750 double...

Hello All I`m about to assemble my 340, I have a question about the rods. There a fully floating 3418645 casting that came out of the motor, The rods have know oiling hole for the gudgeon pin.....Should they have one? Cheers Doug

Hello All A guy over here in Australia has a set of slightly used psi valve springs. done about 1500 k's. The specs are: 1.550 dual springs, id .755.. load is 150 @1.750 open load is 275@ 1.500 with coil bind at 1.190. And he also has a mopar performance hyd cam mp296. has 521" lift and 296 "...

Hello There I`m After a set of 2.02 & 1.60 stainless valves for some J heads that I`m doing up, Just wondering if any one has brought or know of someone that has brought these valves? if so are they any good? Cheers Doug...

Anybody know what this pump is please?? Part No. On Box label : 0806270 On Box: 2824A1 ? Stamp on Pump itself: 548 & 21

Hello All I guy I know has these manly severe duty valves for sale new never used 2.02-1.60 150 thou longer complete set. And stainless steel 273 style Rolla rockers. Will these valves work in a set of J heads?? If they will what springs will I nead to use?? & Do you know what brand these...

Hello All Are these 4 bolt caps ok to use or are the splayd caps better? Cheers Doug

Hello All Would these Federal Mogul Main bearings be ok in a street/strip motor? Has anybody used these rod bearings, Are they any good? Or would they be any good? The bearings have never been used. Cheers Doug