Search results for query: *

wrong area

Ok so I am wanting to build a hot 360. It’s going in a 73 duster 4 speed 8 3/4 with 4.10s and a spool. This is a street/strip, I am ok with it being a handful in the street. Car is manual steering and brakes. Now my power goals are around 425-450 with equal torque and a nasty idle. Yes I know...

Ok so me and a buddy where at the dragstrip just watching and hanging out, he brought up a good question. My Duster idles pretty good hits super hard and lopes good but its a slow lope and most all the fast cars on the track have a very fast idle but hit super hard so my question is what specs...

Ok guy I have plans for the duster and it involves mostly race limited street. My requests Small block Mopar 500-600hp range no forced induction I am waning to run nitrous on top of the 500-600hp The only reason I do not want to run a big block is because I have a 4 speed in the car...

Ok the 318 in my truck has done well and still doing well but getting old. its a 84 318 now I will be mostly daily driving and off-roading (a lot of off-roading) and pulling my duster to the drag strip. I don't want to swap pistons but rering and rebuild everything else. I figured some type...

Ok the 318 in my truck is slow to build oil PSI when it cold of when hot take about 5 sec to get to the center of the gauge. Once it get up to the right psi it fine does not fall much after driving. I am running 10-40 now will it help if I switched to 5-30. I plan on freshening up the engine but...

Ok so I am thinking about pulling the heads and doing a vale job and seals in my 318 on my truck I have a old 4bbr intake would switching from a 2bbr to a 4bbr with a 500cfm carb really make any difference.

Which would be better 1971 J heads 915 stock 2.02 1.6 valves or 1998 360 magnum heads stock

what would be the best valve springs for my engine setup that's in my signiture

On a compression test what psi should I have. 9.1.0 compression this cam http://www.summitracing.com/parts/hrs-cl711451-08/overview/make/chrysler

OK so my rings are done so I am pulling the engine to to the rings thought about doing some other stuff. Set up as of now 71 360 block stock bore and stroke flat top pistions 9.1.0 comp ratio 340 J heads 2.02 1.6 valves cast iron 4bbr 340 intake 750 holley long tubes 3in headers howaed cam...

Ok so right not I am working at a Dodge dealership and love it but am having to drive 40 miles a day. Right now I cam getting 8mpg and need some advise to increase MPG's. I know some of you are going to say get another car for that but I don't want to I love my car being my Daily driv er and...

Ok so I got a new set of valve covers and they don't have and punch outs in the top yet. Will a oil fill cap 1 pcv and 1 breather be fine of should I have another breather. Also would 1 pcv valve and a oil fill be good and use no breather.

Ok got the new setup and wondering what kind of number you guys think it makes. Info 71 360 Stock stroke Std 4in bore 340 J heads 2.02 1.6 valves (milled to 68cc) stock 340 duel plane intake Long tube headers 3in collector flat top pistons 9.2 CR Howard cam Cam Style:Hydraulic flat...

Ok guys tore the engine down and am going to swap the cam.I have allways thought I have the .508 purple shaft cam but need was sure.I pulled the cam out and it says 1136 on the cam which cam is it?

Ok so right now here is my setup 71 year 360 .508 purple shaft cam 340 J heads 2.02 1.60 valves Casting number (3418915) 340 intake casting number (2531915) Stranded bore with no valve relief flat top pistons Long tube headers 3in collector Holley 750 carb Stock mopar electronic ignition...

I want to run a oil cooler on my 360 duster what is the best kit to do it.

Ok so my cam has got some pretty good ware on it and I am ready to change the cam. Set up Now 360 I think about 9.0.1 comp std bore but flat tops .508 cam purple shaft 340 j heads 2.02 1.60 valves 340 intake 750 holley DP I like the whiplash cam...

Ok so I have had a ticking noise coming from 360 for a few weeks changed the lifters yesterday and still making the noise I think it might be a valve.

Ok so I had the throtle cable brake on the way home form school pulled over zip tied it and got it home.So were can I get a new cable the right length thats stronger.

The have been many small block strokers over 450tq but whats the lowest rpm you see 450tq made at.

Ok so I was playing with the cam quest program and this is what it gave me.This is a 360 I have the mopar .508 cam this is with a comp .507 .510 cam With Stock 2 valve wedge hp/stock heads 2.02 and 1.6 valves std flow duel plane 600cfm carb 9.0 comp ratio longtube header open exaust It is...

Ok so who makes a tunnal ram duel carb for a sbm 360.

Ok so I am thinking about changing the rocker arms on my 360. Set up as of now 1971 360 340 J head 2.02 and 1.60 valves std bore flat tops what we thonk to be the .509 cam I would like to change the 1.5 rocker it had now to adj 1.6 rockers how much more clearance would I need.When I did...

Does anyone have some good pics of the bracket and how it mounts to the block on a altnator to a smallblock mopar.

Ok so I bought a one piece reusable gasket for the oil pan on my 360 does it tourqe to the same amount that the stock gasket does.

Ok so how do I put the water/crank pullys on and how do I put the harmonic balancer on.I cant get my crank shaft pully and my water pump pully to line up.Am I missing a spacer or something or do I need to put the harmonic balancer on with a a feller gauge behine it.

Ok so I bought a 360 to replace the 318. Backstory the guy said it was in a dirt track car ran 3 races crashes the car and never drove it again.It was complete mins carb and distrubter. What I know it has 340 J heads big valves It is a 70 casting 360.It also had flat tops, Std bore.318...

I bought a set of 340 head numbers on them are 34189150 what do I have they are J heads big valves.

I have some 318 parts I have to sell. 318 heads needs new valves come off a 68 casting motor Steel crank out of a 68 318 What are they worth.